bassett72

I hope someone can help me. I have a superstock that I have only used about 5 times. On the 5th time, I was having problems getting it to fire in semi mode. It would fire 6 or so very slow shots, then kick into the semi mode. I tried different modes, and had the same issue. I thought maybe there was an issue with the breech sensor, so I took the sensor out and notices that there was a spot where a screw that holds than grip on goes right into that sensor wire. So, I bought a new wire, and filed that screw down so it wouldn't happen again. Thinking I'm going to be good, I try it out. NOW, every time I fire a few quick shots, the whole damn thing shuts off. What am I missing here? I could REALLY use some help. I can't find anyone in the area that knows what is wrong.

Please let me know if you can help.

THanks.....

Venom cocker

I had a similuar problem when i bought a E-2 off ebay with a 1.1v board I found some one to work on it after several hours of messing with it. It turnd out to be a bad board just worn out. Got a new tado board now all good.

bassett72

Will a tado board work in my Superstock SF? Is it worth the investment, or should I be shopping for a different gun?

tlmiller

Without modification, there is no aftermarket boards that will work in the SF frame. The Tadao will FIT, but it won't work.

__________________

Venom cocker

thats good to know

kenny_1491

Buy a cheap E1 frame, and then buy the Tadao board.

__________________




Magenta for RB

Venom cocker

Thats a great idea but I would put the E-2 frame on then the tadao.

Triggers & Boards :: Autococker Upgrades :: Paintball Gun Upgrades :: DeoPaintball

^ here is a good place to start.

kenny_1491

Is there a difference between the frames?

__________________




Magenta for RB

tlmiller

Triggers. Frames themselves are physically identical, but the triggers that fit them are totally different.

__________________

kenny_1491

Ah so just trigger ergonomics?

__________________




Magenta for RB