sgt.slaughter

i have a wgp autococker that has a regulator like the one below. i was wondering if you can take the stock regulator off and put on a sub zero expansion chamber, aci six stage? it fits the spyder imagine i have and my friends gun, but i cant seem to take the stock regulator off. can i?

__________________
Spyder Imagine
16" Truflight Barrel
14" Dye Xcel barrel
2 9" barrels
14" All American Barrel
47/30 centerflag hpa
3 Grav hoppers
VL Evlution Y-Board
Rebel 32 degrees elec trigger
12oz co2 tanks
2 9oz co2 tanks
20oz co2
WGP autococker totally tricked out (*at least it will be*)

totally legit

martix_agent

no, you want to keep the regulator on it; if you do replace it, you'll want to replace it with another regulator

__________________

If your a Christian paintballer put this in your sig.

Another promaster for sale $100!

sgt.slaughter

whats the reason for? i think the expansion chamber is a reg too.
how do you take it off anyways?

__________________
Spyder Imagine
16" Truflight Barrel
14" Dye Xcel barrel
2 9" barrels
14" All American Barrel
47/30 centerflag hpa
3 Grav hoppers
VL Evlution Y-Board
Rebel 32 degrees elec trigger
12oz co2 tanks
2 9oz co2 tanks
20oz co2
WGP autococker totally tricked out (*at least it will be*)

totally legit

2.0

An expansion chamber is not a regulator. It'll work with the expansion chamber, but it's not recommended due to the strain unregulated gas will put on your pneumatics, especially if you don't have a good lpr that can handle unregulated gas. You will wreck your pneumatics.

As martix said, replace with another regulator.

__________________

sgt.slaughter

i have a regulator on my hpa tank though.
but ya my pneumatics are stock besides some new hose and 3 way.

__________________
Spyder Imagine
16" Truflight Barrel
14" Dye Xcel barrel
2 9" barrels
14" All American Barrel
47/30 centerflag hpa
3 Grav hoppers
VL Evlution Y-Board
Rebel 32 degrees elec trigger
12oz co2 tanks
2 9oz co2 tanks
20oz co2
WGP autococker totally tricked out (*at least it will be*)

totally legit

sgt.slaughter

well if i do put a regulator on it than dont you think i should know how to take the current reg. off?
so how does one do that?

__________________
Spyder Imagine
16" Truflight Barrel
14" Dye Xcel barrel
2 9" barrels
14" All American Barrel
47/30 centerflag hpa
3 Grav hoppers
VL Evlution Y-Board
Rebel 32 degrees elec trigger
12oz co2 tanks
2 9oz co2 tanks
20oz co2
WGP autococker totally tricked out (*at least it will be*)

totally legit

2.0

detach your macroline or braided line and just screw it off like you screw off your tank from your asa. If it's too tight, try a hand tool and gently turn it but wrap it in cloth so you don't scratch the hell out of it.

__________________

sgt.slaughter

ok
thanks

__________________
Spyder Imagine
16" Truflight Barrel
14" Dye Xcel barrel
2 9" barrels
14" All American Barrel
47/30 centerflag hpa
3 Grav hoppers
VL Evlution Y-Board
Rebel 32 degrees elec trigger
12oz co2 tanks
2 9oz co2 tanks
20oz co2
WGP autococker totally tricked out (*at least it will be*)

totally legit