emtunderwood

Hello, I got a stock ANS GX-4 autococker and wanting to upgrade it to get the most out of the gun. I know that I can put a e-blade on it, but thats a big chunk of change, I was looking at upgrading what I can without a e-blade right now.
These are what I'm considering first.

Rat 3:16 or eclipse valve maybe macdev
ANS Low Pressure Kit
CP Detent
14 or 16" CP Barrel
ANS Xtreme Flow IVG?
Maddman Spring Kit
Cam Adjuster
Free Flow Low Blow Delrin Blot
Delrin Pin maybe aluminum
evil smoke the pipe feedneck
evo3 hopper
JackHammer 2 LPR Front Reg
Nexus Ram and QEV's
Shocktech or CP low pressure reg maybe empire
Planet Eclipse guage
Standard ANS Front Block
ANS Bomb 3-way

The reason is to try to lower the pressure and increase performance in saving air and increasing/maintaing speed.

If you guys have any suggestions please post.

Thanks

tlmiller

Spring kit will give you all that will, without having to pull out your valve.

Cam adjuster is mostly useless

Evo3 sucks. For about the same price get an EyeForce or for just a tiny bit more get the Invert Halo Too.

GX4 came with a Jackhammer 2 stock.

GX4 already has an ANS front block.

Stock 3-way is very nearly as short as the SHOCKTECH bomb. You won't, in truth, gain a thing from the bomb.

GX-4 had a delrin bolt stock. You won't gain anything from going to a low-blow.

__________________

OhRLY

For the front block, the stock is probably fine. If you want to upgrade, I'd say Belsales Hollowpoint 3-way, and PPS MicroRock LPR. Unless you shoot the same paint all the time, go for a barrel kit on a cocker instead of a single barrel.

I'd probably upgrade the inline reg before anything though, I hated the stock ANS reg. I'd go with an AKA Sidewinder or 2-Liter.

__________________
http://www.trukz.com