Thread Tools

titocampos1990 · August 15th, 05:11 PM

i want to know how you turn UP bounce!

**Christian** · August 27th, 12:48 PM

My custom settings that seemed to work best for my old free flow eblade....

Son-004
cdel-003
con-045
cto-240
coff-025
FILT
bald-001
empd-002
tpull-004
trel-020

**Christian** · August 27th, 12:49 PM

Quote:

Originally Posted by sucks2bu

so how do u get rid of bounce on your cocker?

In all reality, you really can't. (if its an eblade) No matter how you adjust the trigger, there is ALWAYS a sweet spot somewhere.

Sorry for the double post....

**sucks2bu** · August 27th, 07:01 PM

thank you sir ,and you are right.. there is allways a sweet spot no mater what you do..i took it to the shop were the refs for the tourney work at and they told me not to worry to much.. they have cockers and they know what to look for and what to let slide..mines was bounce compliant in their eyes..
they say the only electric gun they have'nt found bounce in yet is the angel fly.....shiieet for all that money i shure hope it dont...

**KidPaintball** · September 2nd, 06:44 PM

Quote:

Originally Posted by exxodus

naughty dogg settings

Son-002
cdel-003
con-030
cto-255
coff-023
FILT
bald-001
empd-002
tpull-004
trel-003

this makes the trigger kinda bouncy so u might want to put the tpull and trel up a bit

I was talking to a ref at my field about this, you know the ND settings, and he said they had diff boards. Is this true, than that would mean you cant really have the same settings as them right?

**misnblu** · September 27th, 04:33 PM

I used the factory fast setting on my '02, took all of the bounce out of it and did some fine tuning on the trigger and is now fast with no bounce at all. You pull the trigger once, it shoots once, no matter how hard you hit or jar the marker.
It shoots so sweet and must redo the settings once I install the Nexxus internals I've got put away.

I hated the gun with all of the bounce and would never play with it that way.
After using all of the suggestions including here for setting the e-blade, finally went with the factory fast as a final setting and this way, if something goes awry, can reset it instantly with the factory fast setting.
That's my input and good luck with your settings.
Misnblu

**IronForge** · September 30th, 08:00 PM

What is bounce?

Recoil??

**IronForge** · October 10th, 11:04 PM

anybody?

**terrible1fi** · October 10th, 11:28 PM

when you pull the trigger once, and you get more than one shot firing

**misnblu** · October 13th, 01:57 PM

Quote:

Originally Posted by terrible1fi

when you pull the trigger once, and you get more than one shot firing

It's when the kick of the marker is making the marker fire again, even though you only pulled the trigger once.
I've seen this and had it on my e-bladed Cocker. I hated it.
There were times the marker bounced so hard that you just pulled the trigger once and just hold it and it would still keep shooting until, well it stopped.

That is bounce.
Misnblu

**inkjt510** · October 30th, 05:47 PM

I use ND settings or factory fast. PM me for the ND if you want em.

**Cocker16** · January 12th, 09:23 AM

Cockers have relativly no kick. Bounce is When theres a sweetspot in the trigg and it registers that you have pulled the trig more than once causing it to fire multiple shots.

**misnblu** · January 14th, 12:51 PM

I just recently reset the timing on mine, getting it to shoot at 17.85 balls per second and still no bounce.
With every pull on the trigger, one shot, consistently.
I think it you have all of the right components, internals, you should be able to get all of the bounce out of the E1.
At recball last week, my team mate used my Cocker and was ripping so fast with it that the refs tried everything to check it for bounce and found none.

I abhor bounce and will not have it on my Cocker.

Misnblu

**sumsimpleracer** · January 14th, 10:18 PM

a friend of mine has his setting as
son 4, cdel 3, con 26, coff 15
and he said he can hit 22

**Sumweirdguy** · February 26th, 10:47 PM

im getting my E1 monday, can anyone post up some really fast settings no matter how much it bounces, my friends and i have our own feild so, im going to reset them to FF, just want to see how fast i can get

**rAtImP91** · March 2nd, 09:04 PM

thanks guys this is really helpfull

**Fubar2** · March 12th, 12:28 AM

k to time my cocker i had to have th eyes off and the gun on holding the red button, sorta confusing because it says that in 3 differnt posts.

cockers are harder then a fully erected penis first thing in the morning.

**joeyk803c** · March 14th, 10:56 PM

Thanks alot guys for the Info. I will be getting me a Worr-blade soon and this has been alot of help!

RB · April 1st, 04:43 PM

does the nd's make it ramp, cause it seems like it!

**Cockerkid63** · April 1st, 05:29 PM

Can Someone Post the ND setting because i have the Factory fast and its kinda slow.