Thread Tools

**tippmannbeast** · June 15th, 07:46 PM

w00t!!
I just won an auction last night off ebay for an 04' chrome hinge fram w/ DYE Sticky 3's, the chrome stock 3-way w/ shaft, and a coupler rod all for $52!!!
i've been stuck w/ a slider since i've had my cocker (last august)
so this will be a big improvent over the 4 bps i've been getting.
Also, my coupling rod has been through alot over the past year, so that will be awsome too! Not to mention that my 4-way shaft bent and almost broke in half the other day- that wudda sucked. It's gettin replaced tho!

My FF Ram broke about a month ago, and I JUST sent it back to Pro to get it repaired yesterday so it'll feel like a whole new cocker!
I'm so excited lol
Also: for everyone who has an 04, how do I adjust the trigger? They're advertised as adjustable, but it doesn't specify what points- length, wobble control, trigger stop- whats that deal? thanks
-Petey

**The nforcer2006** · June 15th, 07:51 PM

if you take off the grips, there will be a little hole you can put a allen key in and turn, once you adjust you have to fix your 3way timing

**tippmannbeast** · June 15th, 08:20 PM

yea what will that adjust...

**The nforcer2006** · June 15th, 08:27 PM

it will adjust the height of the sear, which in turn is your trigger pull

**tippmannbeast** · June 15th, 08:48 PM

thats kinda pointless, because the hammerlug will do the same thing

**The nforcer2006** · June 15th, 08:54 PM

oh yea to add. it gets rid of the extra slack in the pull. i wanted to say that but forgot to.

**Destructo6** · June 15th, 08:57 PM

The set screw limits the sear's downward travel, which in turn shortens the trigger's rearward travel.

As said, adjust your trigger travel first, then retime. The shorter you go, the harder it will be to time, so don't go too crazy.

**tippmannbeast** · June 16th, 03:43 PM

oooooo, okeydokey- thanks! thats a big help- i'll prolly post again for some advice when it gets hurr.

**¤COLD¤** · June 16th, 04:16 PM

you dont need to shoot that fast with cockers as long as u got accuracy your set,althought e blades are nice and no cocker is 100% accurate of coarse

**tippmannbeast** · June 16th, 09:20 PM

nowadays shooting fast is deffinatly a good ability to have considering i usually play against timmy's and angels, so now i can keep up (bps wise)

**tippmannbeast** · June 26th, 03:32 PM

yea!!!! i got my new frame and stuff!!
i'm so excited to play tuesday!!
I installed it, timed it, and then I decided the pull was too long so I tinkered w/ it and now its awsome. I'm having valocity probs again so i gotta sweetspot my reg AGAIN

**DaBluedevil** · June 26th, 04:23 PM

Clean out your regs good. There might be some old grease stuck in there.

**tippmannbeast** · June 26th, 10:02 PM

yea, what shud I use to lube my regs?

**lightbulb8817** · June 26th, 10:07 PM

Quote:

Originally Posted by tippmannbeast

nowadays shooting fast is deffinatly a good ability to have considering i usually play against timmy's and angels, so now i can keep up (bps wise)

bps- a hinge will not keep up with timmy's or angels.

**tippmannbeast** · June 26th, 10:30 PM

nah i didn't mean that
I meant i could at get closer than with my slider.

**SFOD_D** · June 27th, 09:18 PM

pete, u should have asked me how to adjust it...meh...cant wait to go play with you

**tippmannbeast** · June 28th, 03:21 PM

lol
yea got it down soooo far my friend was actually walking it- i was like HOLY SH*T
lol i gotta get a vid of him doing that and posting it so u'll beleive me

Thread Tools

View more Paintball photos