Thread Tools

**!nSaNe-ImPy** · July 5th, 01:14 AM

Sorry bout the title...im feelin creative...anywho
Im thinkin about gettin an 04 vert feed cocker. Later on im gonna eblade it for speed. This tourney worthy? Or is it dumber than nails, toast, and doorknobs?

**CoolHipJim56** · July 5th, 02:09 AM

Wait a minute, are you asking if a cocker is tourney worthy, becuase if you are, then yes, expecially if it is e-bladed.

**!nSaNe-ImPy** · July 5th, 11:33 AM

i know its tourny worthy..i was just makin sure that would be a good move.

***NYY*** · July 5th, 11:46 AM

just buy a prostock they come ebladed

**Stopie** · July 5th, 12:09 PM

Is t3h prostock the one where its a stock cocker w/ a e-blade?

If it is, then you'll want to upgrade your RAM and your internals...and maybe get a new bolt.

***NYY*** · July 5th, 12:10 PM

yea, and its cheaper than buying a stock cocker then adding eblade to it

**Stopie** · July 5th, 12:26 PM

Sounds like a plan...just up the RAM so it can keep up w/ u if u can shoot fast. And the internals are also a good idea. (I say this cause i outshot the valve on my firnds e-cocker...its a stock 03 w/ an eblade and a shocktech lpr)

**CoolHipJim56** · July 5th, 12:34 PM

The prostock comes with STO pneumatics...

**Stopie** · July 5th, 12:39 PM

w00t w00t...gues u can leave t3h ram as is

**TheAngryGumba11** · July 5th, 02:47 PM

NYY the Prostock is NOT an Ebladed Gun. Check www.worr.com Prostock is Just The Base 04 Marker. Super Stock is the E-Bladed Version. Or a NigthKast Comes With an Eblade as Well. Just thought I'd make the Correction B4 Someone Buys something they Didn't Want.

***D_Smalls*** · July 5th, 08:03 PM

i have a 2k3.. how do they put the eye on it? does it replace the ball detent? cuz when ive seen em they have the eye on the opposite side of the ball detent.. do they drill or a hole or what?

also, think its stupid if to get a worr blade kit if i play mostly rec and a tiny tiny bit of tourny?

**DaBluedevil** · July 5th, 08:10 PM

They drill opposite side of the detent, if your shootnig the gun, the right side. They drill 2 holes, one for the eye, and the other for the screw to hold the cover on.

***NYY*** · July 5th, 09:34 PM

prostock, superstocker, you can see how i mixed them up

**TheAngryGumba11** · July 5th, 11:17 PM

No problem, just figured didn't wanan steer him the wrong way. I know my Orr Guns. After All I do Shoot One. "NightKast" Not to Be COnfused with an OutKast LoL. Just Messin Yo.

**!nSaNe-ImPy** · July 6th, 01:58 AM

so you think i should get a superstock or a nightkast? If i get the superstock (cheaper) than i wouldnt have to get new ram i would just have to get new internals?? fill me in

***NYY*** · July 6th, 07:45 AM

if you have the money, get an eclass orracle

**!nSaNe-ImPy** · July 6th, 12:18 PM

Dont got it..arent they like 1000 american right? I might be lookin at the wrong one. Im probably gonna get the superstock instead of going mech right into eblade because its cheaper. Would i have to buy new ram or new internals? I dont thing ram is a problem since it has 2004 pneumatics. What else?
EDIT- Next pay check im gonna go ahead and order an 04 vert feed cocker and then in a while when i get enough spending money (after some stuff) im gonna eblade it. If i get the 04 vert feed would i need to buy new pneums or ram? What if i dont get the necisarry upgrades? will the gun break and be a waste?

***NYY*** · July 6th, 02:32 PM

its probably fine stock, except for the barrel, you should be able to use a superstocker just like any ebladed cocker

**!nSaNe-ImPy** · July 6th, 11:32 PM

is it better to just get the 03 cocker because its cheaper? Or is the 100 dollars worth it? 0?

***NYY*** · July 6th, 11:40 PM

well yea, eblade is definately > mech

Thread Tools

View more Paintball photos