|
Basically when you get it, you'll want to screw the barrel on, screw the reg, attach the air fitting to the bottom of the reg with a crescent wrench, attach another air fitting on the drop forward, attach the drop forward to the marker using 2 10/32" screws (length does not really matter, as long as it is long enough to clear the dropforward and screw into the grip a few centimeters). So now you have the drop attached, and you'll need to cut some macroline to length and attach it to the marker. Also, if you ordered the same drop you said you would earlier, there is a plug on the other side of the asa, opposite of where you screwed in the air fitting. Remove that plug and either put threadlock on it (recommended) or teflon, it will probably leak otherwise. Remove the bolt and make sure it is well lubed, if it is, then good, if it isn't, lube it. You are ready to go, just cock the gun before you air it up. You already have my AIM SN, so if you have any more questions just ask.
__________________
Black E-Orracle Autococker
SM-1 Barrel System
QEV'ed Eclipse Ram
Black Reloader B
Uni-mount
Crossfire 68/4500
Hybrid Technologies Clamping feedneck
CCM Straight pump arm
Jackal Hi-Speed Bolt
COMING SOON: CP Reg
Captain of Team Insomnia
www.freewebs.com/insomniapaintball/
PM me if you want to buy an electronic spyder or Z-board evvy, I also have masks, a pack, etc available for sale
|
chaching badabing
