sentinel_7788

okay, im a total newb when it comes to autcockers...I just got this orracle a little while ago, and i know how to time it kinda, but okay heres my problem. Okay when i screw my tank into my cocker it wont even cock back, and my tank is totally full, and when i manually cock it,and pull the trigger it just makes a weak sputtering and doesnt even recock, i tried adjusting the actuator collar thing before the 3 way, and adjusting the pressure, and it still wont work right, help please?

__________________
Orracle autococker
12vt revvy
47/3000 centerflag tank
CORE universal noobie drop forward
b2k3 barrel
proud captain
*team Combustion*
Quote: Originally posted by triggerhappyman on 05 August 2003

i personally prefer my tippmann over the angel... im too afraid of scratching something like that, and i like to rest my finger on the trigger with the safety off.... can't do that with the angel...


check out our team website:
http://www.geocities.com/instagator98c/www.html

andy_5187

well to set your timing right with your 3 way you'll want to lengthen or shorten the collar just enough so you can see the front hole in your three way (see it barely) Another would be clean your regs. make sure your bolt isnt stuck like a paintball got pinched in there not letting your gun recock. thats all i can think of at the moment

__________________
Team Nemesis

ezmonet

Check to make sure that your reg/lpr is turned up enough. Sounds like your cocker is starving for air.

Ez

__________________
Autococker Owners Group #9

If you don't have time to do it right the first time then you have time to do it again.

-unknown-

sentinel_7788

well i tried adjusting my reg and it still wouldnt work.

__________________
Orracle autococker
12vt revvy
47/3000 centerflag tank
CORE universal noobie drop forward
b2k3 barrel
proud captain
*team Combustion*
Quote: Originally posted by triggerhappyman on 05 August 2003

i personally prefer my tippmann over the angel... im too afraid of scratching something like that, and i like to rest my finger on the trigger with the safety off.... can't do that with the angel...


check out our team website:
http://www.geocities.com/instagator98c/www.html

ezmonet

Hold your trigger down and turing your reg/lpr clockwise and see if your backblock starts moving. From a complete off to the on position it takes 5 complete turns on my autococker.

Hope it helps
Ez

__________________
Autococker Owners Group #9

If you don't have time to do it right the first time then you have time to do it again.

-unknown-

sentinel_7788

yeah i will try that thx

__________________
Orracle autococker
12vt revvy
47/3000 centerflag tank
CORE universal noobie drop forward
b2k3 barrel
proud captain
*team Combustion*
Quote: Originally posted by triggerhappyman on 05 August 2003

i personally prefer my tippmann over the angel... im too afraid of scratching something like that, and i like to rest my finger on the trigger with the safety off.... can't do that with the angel...


check out our team website:
http://www.geocities.com/instagator98c/www.html

dhill0413

if that dont work take it to a proshop.

__________________
2k2 LCD C&C
Cocker Owner #21....Green 2k2
Model 98