CockerGuy55

I just bought a a cocker from a friend... When i got it i had to replase the cocking rod to stop some leaking.. When i go to fire the gun it works good and then when i shoot a paintball out it fine, but then the next shot either dosent shoot a paintball or the bolt dosent cock all the way back???

Can anyone help?

sumsimpleracer

is it timed correctly?

__________________

Master of Paint

Your cocking pressure may be too low. Turn up the LPR some to see if that helps any. Also, refer to the autococker sticky and make sure each aspect of timing checks out okay. Pay main attention to the sear adjustments and the 3-way adjustments.

__________________
_Clark


Only real men know how to count to eight: 18436572
Make your own Hoff Plane!

CoolHipJim56

If you had to buy a new cocking rod, it might be that your cocking rod head is too far back on the rod, for the backblock to pull the cocking rod and hammer far enough back to catch the sear everytime. Take a hex key, loosen the screw on the top of the cocking rod, and twist it so it goes further down the cocking rod, then shoot it, and see if it re-cocks evertime, if it doesnt, crank it down until it does.

__________________


"Money can't buy happiness, but neither can poverty." - Leo Rosten