Thread Tools

**the knot_2** · October 21st, 12:24 PM

i was shooting my cocker today and when i would shoot a few the bolt would stay forword and leak out the barrel...this might becuses i only have 800psi in my tank or it mignt not...can some one tell me ??

**Cerebeus** · October 21st, 01:20 PM

Cockers are closed bolt so the bolt should be forward... But the leaking down the barrel means you should check your cup seal.

**lbreevesii** · October 21st, 03:41 PM

yeah, most likley a leaky cup seal. take off your reg and put a few drops of oil in the asa. then put your reg back on and dry fire it w/o the barrel several times. see if that helps

**ezmonet** · October 21st, 03:59 PM

Do you really want to add oil to a ebladed cocker that way. I thought that you would ruin the 3 way solenoid.

Ez

**Cerebeus** · October 21st, 04:15 PM

It won't hurt it at all. All electros have air going through the solenoid somew ay and people still say to put oil in the asa and dry fire.. It's fine.

**imhungry** · October 21st, 05:12 PM

ur LPR pressure migh be too low. thats probably what it is. if that is not the case i would say check ur inline, then if thats fine and its still doing it check ur cupseal (have fun, i hate messin w/ that crap)

**the knot_2** · October 21st, 05:54 PM

ok i just got this gun its my first cocker...how do i get the cupseal out.i could just mess with it and find out but ppl say cockers are hard to work on>>anyhelp

Thread Tools

View more Paintball photos