Thread Tools

**X_Paintball7_X** · December 28th, 10:04 AM

ok ill shoot the gun and it will cock and make the noise and all that **** but then the balls keep getting stuck inside the barrel....whats the matter?

**Adidac** · December 28th, 10:31 AM

Stuck as in they can't shoot out? or Stuck as in they are actually stuck in the barrel, and if you tip the barrel, it can't even roll out?

If they roll out, i would guess you are either

1. Low on air.
2. you put the bolt upside down

**Metal_Militia** · December 28th, 10:37 AM

or you could be short stroking it

**X_Paintball7_X** · December 28th, 11:35 AM

im not short stroking it....and stuck as in theres like no pressure to push them out of the barrel and i just got the tank filled this mornin

**lbreevesii** · December 28th, 12:18 PM

as was said, make sure that you didn't put the bolt in updide down. thats probably the problem. that or your timing is off and the sear can't come off of the lug.

**ZoWnX** · December 28th, 12:50 PM

take off the barrel and make sure it is actually firing.

**X_Paintball7_X** · December 28th, 02:42 PM

bolt was upside down

thanks guys

**Trigger-Happy** · December 28th, 03:40 PM

friend had the same problem, just flip ur bolt, its upside down

**ZoWnX** · December 28th, 05:28 PM

trigger... your a quick one arnt ya :-P

**Adidac** · December 28th, 08:44 PM

lol.... I had the same problem after I cleaned it when I first got it. I was freaking out, I thought I had broke something. cleaned it again to be sure, and checked the bolt and I fixed it.

Glad I could help.

Slugman · December 28th, 09:47 PM

Quote:

Stuck as in they can't shoot out? or Stuck as in they are actually stuck in the barrel, and if you tip the barrel, it can't even roll out?

the ball isnt supposed to roll out in the first place...

if it does then you have a horrible paint to barrel match :/

**Adidac** · December 29th, 01:01 AM

"the ball isnt supposed to roll out in the first place...

if it does then you have a horrible paint to barrel match"

I meant if he could blow through it. anyway, he got it fixed.

invictous6 · January 5th, 08:44 PM

normaly the ram pushing the bolt forwards will konock the pait out of the barrell

**No1TubaPlayer** · January 5th, 08:59 PM

as soon as i read "gun isnt shooting" i was gonna post somethin smart like... did u try pulling the trigger?

**Adidac** · January 6th, 08:10 PM

I wish I would have said that. :P

**cockerking** · January 6th, 08:19 PM

my gun is doin the same thing but the bolt is in the right way i think? the big hole goes to the bottom right?

**Master of Paint** · January 6th, 10:44 PM

Yes. They should just start marking the bolts with an arrow and text that says 'this side down'

Thread Tools

View more Paintball photos