Originally Posted by http://www.pbnation.com/showthread.php?s=&postid=9612772

How to time an e-blade autococker

SON – Step 1: Cock the gun and shoot to see if the sear releases. Do this 10 times
Step 2: If sear releases all 10 times, then lower son by 1, and repeat step 1.
Step 3: Keep repeating step 2 until sear doesn’t release all 10 times, and up the son by 1. This is you minimal son time

CDEL – Step 1: Start with the setting at 3.
Step 2: Put plastic bag over the feedneck, leave some slack.
Step 3: Shoot the gun, and check to see if it is sucking the plastic down, or blowing it up.
Step 4: If it is sucking up, leave the setting alone. But if it is blowing, keep raising the setting 1 at a time, and repeat steps 2-3 until you get suction.

CON – Step 1: Put a ball in the feedneck
Step 2: Have setting at 40
Step 3: If ball drops then lower settings by 2, and keep lowering until the ball doesn’t drop in. Then at this setting, raise it by 2.
Step 4: if ball doesn’t drop in, keep raising the setting by 2 until the ball does drop in.
Step 5: test settings 10 times, if ball doesn’t drop in all 10 times, raise the setting by 1.

CTO – I would just leave this alone.

COFF – we will be looking at con while adjusting coff
Step 1: leave coff at 30 for now
Step 2: turn out ivg, until it is flush with the body.
Step 3: put con setting at 25
Step 4: shoot marker
Step 5: if the gun cocks, test it 10 times to see if it cocks all 10 times
Step 6: if it did cock all 10 times, then lower con setting by 2 and repeat step 5 until the gun doesn’t cock all 10 times, and then raise con setting by 2. This con setting will be your coff setting. Put back your con settings to what you had it before
Step 7: if your gun didn’t cock all 10 times, then raise it by 2, and repeat step 5 until the gun cocks all 10 times. This will be your coff setting, and put back your con settings to what you had it before.

if you guys see anything wrong, or would like to add to this, just tell me.

tell me what you guys think

Originally Posted by rivit

I need bigger pantaloons