Thread Tools

**WorrGames02** · January 2nd, 05:50 PM

Well.. i took apart my gun and the trigger is by itself, on the totorial i was looking at it says pout a 5/64 allen key in the hole and turn -> shorter. but its not doing anything at all..

**lbreevesii** · January 2nd, 07:01 PM

are you sure that you know what you are doing? what are you trying to adjust? that lug? to adjust the lug you just remove the bolt and stick the proper sized allen wrench down through the hole in the top of the gun. if you are talking about the sear stop on wgp hinge trigger frames then you just have to take off the grips and stick the properly sized allen wrench into the hole near the top of the frame(inside grip section) and turn it to the right.

**Cocker16** · January 2nd, 10:49 PM

wtf man triple post wow thats like a killtrocity on halo2.

**lbreevesii** · January 3rd, 07:23 AM

hahaa. sorry about that. pbf was crappin out on me last night and it would time and where i had to idea if it had posted or not.

**jaggy13** · January 3rd, 12:32 PM

sounds like he was adjusting the set screw on the trigger. (allen that holds trigger on pin) If it was very stiff and would only loosen and you got to it by taking the hinge off the body and comining at it from the tob of the trigger. you need to tighten that back up.
Larry has you on the right track to adjust the sear stop and lug.

**Cocker16** · January 3rd, 12:44 PM

jaggy that hapopend to me. PBF has been really slow for me 2 lately like the 56k at my school is goin faster than my roadrunner.

**snipes87** · January 3rd, 08:29 PM

yeah.. i just had a really big problem with my slide trigger, the spring was jacked up (the one that holds the trigger sear).. so it wasn't catching the lug...

nice job stealing my siggy! haha. .kiddin'

**WorrGames02** · January 3rd, 08:38 PM

lol its too cool tho

invictous6 · January 4th, 04:35 PM

invictous6 · January 4th, 04:41 PM

yeah you know the hole in the top of the body? take your hammer and bolt out, put your allen wrench down that hole and turn it clock wise, that will shorten your trigger pull , but if I were you i'd put the frame back on it and ley some one who knows what they are doing do that, no from some video on the internet.
(P.S. If you turn it to far you will not have any trigger pull and then you have too screw w/ it even more)

invictous6 · January 17th, 04:18 PM

you dont have to take it out but you can find the lug better

***PaintballinR*** · January 19th, 01:25 AM

are you talkin about the little allen wrench screw when you take off the grips its on the top of the little hole...yea it doesnt really adjust it that much inless you move the lug around to..just play around with it to get it right..

Thread Tools

View more Paintball photos