1337

This is the basic way to wire your subwoofer(s).

Items needed:
- Subwoofer
- Amplifier
- Power wire
- Ground wire
- RCA Cables
- Remote wire
- Speaker wire
- Crimps
- Fuse

1. Figure out where you want to mount everything.
2. Take your headunit out.
3. Plug in and route the RCA cables to the amp.
4. Cut the connector off the remote wire *blue wire*, twist wire, and twist remote wire to it. Route to amp.
5. Put your headunit back in.
6. Plug ground wire in.
7. Using a circle crimp on the other end, find a place on the body, trunk, anything metal to attach it to. You might get lucky and already have a good sized hole to put a screw through. But most of the time you have to drill a hole.
8. Once it's grounded, start running your power cable. This could either be the hardest part, or an easy part. Look under your carpet on the passanger side for a plug of some sort or any hole for that matter. This is called the firewall, and the power cable must run through the firewall to get to the battery on the car. If there is a hole or plug, unplug it and run the cable through. It's best to have someone help you do this. If there is no hole or plug, you will have to drill one. Go about 1 1/2 the size of the wire. When drilling a hole in the firewall, be careful to NOT drill through anything important. Be sure to check both sides CAREFULLY.
9. Once the wire is routed to the battery, cut off or use any extra power cord. Should be about 6 inches. Strip both ends and strip the end you just cut off or just ran through the firewall. Attach the wite from the firewall to one side of the fuse.
10. Attach the shorter wire to the other side of the fuse and use an oval crimp to attach it to the POSITIVE side of the battery. You will need to take the nut off.
11. Turn the radio on and check the amp for power. If you have power, then move onto the next step. If not, double check everything.
12. Plug the speaker wire in. R+ and L- or vice versa on the channel. Plug the other ends on the subwoofer. Remember, Red/Copper = Positive, Black/Silver = Negative.
13. If it hits, you're in good shape. As far as tuning the amp, just make the screw on the back about in the middle, do not go past 3/4. Depending on your headunit, most adjustments should be made there.

This is just a basic writeup. Just a tip, mount the amp on the back of your box. Other than that, under the passanger seat is one of the next best places.

I'll probably edit this later. If you have any questions or input, feel free to post. Just figure I would put a basic write-up out there because "professionals" can charge a lotta dough to do something so simple..

Pierced

nicely done.

just want to add a few things though

when making your ground connection take a file or some sand paper and scape any paint off from the section you are making your ground at this ensures you get a good ground


if you have to drill holes to run your wire besure to put a rubber grommet in the hole to keep the metal from damaging your wire and causing lot of problems later on down the line

and be sure to select power wire that fits your needs if your wire is too small you can overwork the amp and damage it and you will get better performance from your amp if you use the proper wire


and to set your "level/gain" on the amp is to turn level all the way down then turn your HU up to a pretty loud setting and slowly increase you gain till it starts to distort a little then turn it back about an 1/8th of a turn and your level is now set

__________________

mLuH

i might use this down the line...pictures would be a great help

__________________
Thanx A LOT Predator14

Buy my stock NXT
http://www.paintballforum.com/electr...ml#post2027536

1337

I just wired a truck today, should have taken pictures.

Next car I wire up I'll get some pictures.

mLuH

awesome, ill be taking some intro to automotive classes here in probably the next year or so, so maybe doing this with someone who knows some about cars will help me gain more knowledge before i start the class, making it that much easier.

__________________
Thanx A LOT Predator14

Buy my stock NXT
http://www.paintballforum.com/electr...ml#post2027536

Pierced

i am putting in an a flip screen in my blazer this weekend i will get some pics of it going in

__________________

bunkertime

I also noticed that 1337 didn't say that make sure you run your power and signal wires on OPPOSITE sides of the vehical.. The power cabel emmits signals that will distort your signal and can give you bad sound quality.

Also.. Most vehicals have a large hole already in the fire wall for all your eletrical to pass through. Look for this hole. It's usualy on the same side of the car as your battery. What most ppl do is find a hole with a wire already going through it in the wire, carefully englare the hole a tiny bit, and slip your power cable through it.


and for alot of Newer vehicals, your head unit will be iso-mounted. meaning that it is bolted in the back and you must dis-assemble the dash to remove the head unit. If you can't dissasemble the dash or don't want to, most audio shops will charg ytou like $20 (usualy the shop min.) to remove your head unit and plug your wires in. If you are uncomfortable removing your dash, i sugject this, b/c if you break something, ur ****ed. If they break something, they must replace it.

__________________
she's a virgin if u don't count anal


•••

dhill0413

My subwoofer installation instructions:


1. Have friends that install car audio at Circuit City.
2. Buy some beer and watch them install.



But seriously...good thread.

__________________
2k2 LCD C&C
Cocker Owner #21....Green 2k2
Model 98

1337

I've done about 10-15 subwoofer installs since I made this and I usually only charge about $20. It's not the most "professional" job but it sure does beat paying Best Buy or Circuit City $80+ for this simple job. My stereo installs have been the best at my school, noone else has done a better job then me.

Just a way to earn some extra bucks if you have some free time on your hands. Also my buddy works at the Pawn Shop, so I always bring my friends up there and get them a good deal. I bring them customers, I get great deals.

__________________

WTB: Angel LED/LCD or Gen E Matrix

I would like to solve the puzzle...

mavsfan31

My cousin is just happy to help someone out.

Sometimes he gets a meal out of it, but that's definetly not why he does it.

__________________
John

1337

I usually install to my friends for free.

Hell one kid traded me a handle of vodka for his install. I made that last about 2 weekends and had my fun.

__________________

WTB: Angel LED/LCD or Gen E Matrix

I would like to solve the puzzle...

Rick78

the OFFICIAL 1337 SUB INSTALL TOOLBOX:










and thats all you need to install a sub, right 1337? lol just messing with you dude

__________________
******* Dont be shy, request me
Our 1960 Corvette Restoration Progress
HOCKEY RINK RACING LINK

1337

Hahaha

Thats how I do.

Nah usually if theres no hole in the firewall, I'll run it through the fender. Also I use electrical tape instead of crimps and it holds off fine. I still hide the wires and everything though.

__________________

WTB: Angel LED/LCD or Gen E Matrix

I would like to solve the puzzle...