Tippy_A-5

I have an A-5 with the egrip and after I shoot for a while I cant get the barrel off for some time after this becomes a major problem if I have to sgueege out the barrel durring a game. Can anyone tell me how to fix this problem (how to get the barrel off)

__________________
THIS IS HOW IT GOES, WELCOME ONE AND ALL TO THE SHOW, WE'RE WIRED UP FIRED UP Fn' READY TO GO...

Black SFT Smart Parts Shocker
Virtue Russian Legion Board
Virtue Russian Legion Grips
CP Reg
CP ASA
Shocktech Trigger Frame
Shocktech Trigger
Shocktech Snatch Grip
14" Stiffi Barrel
14" Dye Ultralite Barrel
16" Dye Boomstick Barrel
CCM No-Rise Feed neck
07 Killa Detents
Freeflow Bolt system
Halo B w/Rip Drive w/V35 Board
Pure Energy 88ci 45k Tank

kidpaintballer

uhhh... typically you will un-screw it the opposite way that you screwed it on...but maybe someone is messing with you and they put some loctite (or however you spell it) in it. but typically they will come off with out a hitch

__________________
Feedback

tmaxx_2.5

make sure your unsrewing it counter-clockwise, also make sure its not cross-threaded or something..

__________________
Louisiana Tech University Paintball
Powered by KEE Action Sports

Tippy_A-5

i am turning it the right way and after about 10 muniets i can get it off no problem its after i shoot for a long time that i cant get it off. I'm wondering if i dont have enough oil on the threads.

__________________
THIS IS HOW IT GOES, WELCOME ONE AND ALL TO THE SHOW, WE'RE WIRED UP FIRED UP Fn' READY TO GO...

Black SFT Smart Parts Shocker
Virtue Russian Legion Board
Virtue Russian Legion Grips
CP Reg
CP ASA
Shocktech Trigger Frame
Shocktech Trigger
Shocktech Snatch Grip
14" Stiffi Barrel
14" Dye Ultralite Barrel
16" Dye Boomstick Barrel
CCM No-Rise Feed neck
07 Killa Detents
Freeflow Bolt system
Halo B w/Rip Drive w/V35 Board
Pure Energy 88ci 45k Tank

tmaxx_2.5

then go ahead and oil it up good and make sure the threads are clean. Also, does it have an o-ring on it?

__________________
Louisiana Tech University Paintball
Powered by KEE Action Sports

P8ntballin Hobo

yea.. check for o-rings and check em to see if there not cut or anything then lube the threads..

__________________

CAPTAIN : TEAM PULSE

if your a Christian paintballer put this in your sig.

you get a cookie if you press ctrl + W

cgmhkc

if your o ring gets cold enoughf it can flare out stopping u from taking your barrel off just let it sit for a while cause if u force it youll cut your o rings