¤COLD¤

well i finally got my tx. storm timmy working,i ordered a 100 of each orings off intim. owners and replace nearly all of them,rub it up with some shocktech butta, set my dwell on 8.0 Debounce 1 ,2 ms. haha ,input pressre is 200 and lpr is about 75,shooting ropes like never before,i appreciate all your guys help and see ya around the forums,if u ever need help feel free to pm me

the pressure i am stilla little confused about cause i gotta raise my hpr to about 300 for it to seal,and then lower it back down once the seal has been made, my final pressure tends to be what i said before 200/75 with no shoot down and a fps of ,5+/-,ne help or info on this is greatly appreciated

__________________

----------------------- ------------------------
ROCKING PM5
OLD SCHOOL AUTOCOCKER OWNER 16

NIGHT

mine starts to do the same thing not seal from the ram but if i push the bolt a little bit forward and let it come back it takes care of it everytime without changing pressure

__________________
~2K2 Timmy~
If you are a christian paintballer put this in your signature

DaBluedevil

Try a different lube if it isn't sealin right away. Gotta find what your timmy likes best. Mine seals right up with some dow33.

__________________
life love stress setbacks