floridalawdog

I took my 2 new timmys to the field today, and had the same problem with them. Each time I shoot the gun, the bolt pin, I think thats what they are called, would pop up, and the bolt would come out the back. I push them down, shoot and pop, right back up. I dont know what the deal is because it happened with both guns. I hope someone can please shed some light for me. Thanks

Also, Do they only shoot in semi auto, or is there any ramping or other options?

crankwalk

Bolt pin retaining screws are loose. USUALLY a 1/8" allen key into the back of the bolt to tighten it up will work. Might be different for aftermarket bolts, but just look into the back of the bolt and you'll see a little set-screw is in there.

Timmys can come with different boards.. the newest frenzy boards have modes/ramping - version 127.4 and up, or the Infamous/Empire 1.5 boards from 2006 Timmies. Frenzy v116 was the semi only. (speaking of 2k5, alias style markers here)

__________________
My Feedback: IOG | PBN old - PBN new | PBR
Intimidator wiring, barbs, o-rings, screws, & many other maintenance parts!
Timmy part-out: bodies, frames, internals, more!
** http://www.intimidatorowners.com - Forums dedicated to Timmys! **

noheattomorrow

it is the set screw in te bolt, you may have to call blast and they will send you a new one for free if it is missing. you need a ball berring (sp?) spring and a set screw... this happened to mew too many times.....

__________________
2k2 shocktech intimidator
Bruce Lee grips
WAS 2.6
Shocktech on/off with rail
Shocktech bolt
CP snatch grip
CP trigger
14" black/blue dye ul barrel
45/45 empire fuel lp
white profilers
vlocity (f/t/ pending)