Thread Tools

10-36 · July 29th, 11:12 PM

Hey! I received a Bob Long body and need help upgrading it. Can anyone help me? I am a "noob" so I apologize in advance.

***crankwalk*** · July 30th, 08:14 AM

That is an ECX body

10-36 · July 31st, 01:14 AM

Okay . . . . so how 2k5'ed out can I go? I plan on doing the following

Hybird Intimidator Ultra High Flow Barb/Hose Kit
Bob Long Intimidator Upgrade Ram Kit (Alias Internals)
Bob Long Intimidator Black Gloss Ram Sleeve
New Ball Detents
and changing the Feed Neck

I haven't decided on a feedneck though? Any suggestions? Currently it does, yes, have an old CP QD feedneck.

Any other ideas?

10-36 · July 31st, 01:54 AM

Here is my current front block with Ashcroft gauge, CP Regulator, and Smart Parts ASA.

???? Will the Bob Long 2k4/Alias Front Block work on my 2k2 ECX body??

Thanks, I know I have a lot of noob questions. I really do appreciate the help.

***crankwalk*** · August 1st, 12:16 AM

The parts you listed will work but you'll also need an Alias poppet to go with that Alias ram you're getting.

And the 2k5 front block will physically fit, but it is not a direct bolt-on mod. THe retaining mechanisms are different for 2k2 and 2k5/Alias blocks (at least the one you listed there - there's an exception with the 2k4/2k5 Empire block). While 2k2 front blocks use a screw that goes into a threaded portion of the block itself, Alias blocks are not threaded at all.. rather the bodies are threaded for a large grub screw. You'd need to have your body drilled and tapped to accept this grub screw.

midwestshooter · August 31st, 11:01 PM

2k5 trigger frame

Thread Tools

View more Paintball photos