exxodus

How do i unlock debounce 1 on a WAS 2.7 board?

PaiNtBaLLeR_200

follow my instructions
1. Hold down the trigger and turn the gun on, look at the led it will cycle thru or whatever when it stops, let go.
2. cycle thru until you are at the color green.
3. hold down the trigger on green. when the light goes out, let go of the trigger.
4. the led will blink the number that equals your debounce ms.
5. click the trigger slowly, being sure that the led blinks with your pull, 250 times and stop, let the LED read the clicks, and it will cycle thru the colors.
6. turn the gun off, then back on
7. go thru the menu, to debounce. it will be on 250.
8. cycle up slowly until it rolls over to 0, then 1.
9. save on 1.


PS. dont save on 0, 0 is not the fastest, yet the completely slowest db there can be.

__________________

exxodus

thanks

Shutta

why doesnt it use the lcd?

and how do u change db on a GZ with was 2.8?

__________________

Paceley200099

It's hard. You have to read and fully understand the manual for the board.

__________________

Hey, remember when I was like, 10?