Elixir

When I attach my c02 (9oz pure energy) my it makes a pshh noise and some air comes out of the barrel, is this normal? and when the tank runs out of air its goes psshh till out of the barrel is empty, I dont know if something is wrong or not. And one more question, what parts of my gun am I supposed to oil?

paintballinkid6

No, you have a leak somewhere. Check the o-ring on the tank and if it's broken you need new o-rings. Make sure the braided hose that goes into your gun is tight, too.

__________________

Diablo Mongoose II
all stock
Halo B-custom paintjob w/ speedfeed and rip drive
Hopefully soon an SP Progressive barrel 14" and
V-Force Profiler(big hope)

Rate it.

If your parents DON'T pay for your paintball stuff, put this on your sig

TheAznInvazn

True, when you have a full tank, it shouldn't noticably leak anywhere.

It is possible that you have a damaged/worn/dirty cup seal. Check that ontop of checking all of your o-rings.

Also, when you're tank is low on gas, it will start to leak down the barrel. The pressure from the hammer/striker is pressing against the valve pin enough, and there sin't enough pressure from the CO2 behind the valve pin to seal propperly, so it will leak, but again, that should only happen when you're low on CO2 only.

__________________