Paintball Guns and Gear forums banner

Brass Eagle Marauder burp and rapid fire

4K views 4 replies 3 participants last post by  Foxxy Tail 
#1 ·
So my friend recently bought a used BE Marauder for 15 dollars to get into the sport, and has had troubles with the marker burping. He brought it to me just recently asking me to repair it, and I thought I'd take a look, although by no means am I a paintball expert, I do have a knack for mechanical systems, and can easily figure out how these markers work. Well, anyways, I opened it up, cleaned the entire weapon, inspected and replaced all o-rings, and lubed/reassembled, and I am still getting the problem. Thinking to check the sear, as is with most burping problems, I opened it once again and inspected it, finding wear on the edge of the sear, so much so that the edge is slightly rounded. I was wondering if, 1: It could possibly be any other component of the marker failing, and 2: If, even though this brand was discontinued, that I could find a similar/replacement part for the sear/entire trigger assembly. Thanks for your time and any help!
 
#4 ·
if you replaced the orings and lubed it properly an it's still doing it it can only be a few things

a) the sear. I have no idea where to get a replacement part for it.
b) the grip frame may not be screwed on tightly
c) you could just be low on air
d) your tank valve stem may not be fully depressed when it's screwed in, or you're not screwing the tank all the way in.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top