Thread Tools

***tippmann98777*** · July 17th, 06:34 PM

ok i have ben postin this question for awhile and still nobody can really answer it because it is very very hard andmost people havent hear of such work or looked into but i know that there are some tippman people who are high nolledged about theis stuff so here i go ..... i want to take a tippman 98 custom with a response triggerand make it into a electric gun without usuing the e-bolt. iwant to try and keep the rt in ther but it is not a must bot that wold be very cool i also would like this custom work not to cost over 100 bucks if possible mabeylike undr 150 but lets ceep it low

sooo...lets see if nebody can help me out with this if you can wrot on this thread but if you would like to talk to personaly im meat cjlidtke or email me at cjlidtke@aol.com

**freakpizzaboy** · July 17th, 06:39 PM

one suggestion to finding help would to type in english

**Badinflewinse** · July 18th, 09:19 AM

Quote:

Originally Posted by tippmann98777

Ok, I've been posting this question for awhile and still nobody can really answer it. It's very, very hard and most people haven't heard of such work or looked into it. However I know that there are some tippman people who are highly knowledgeable about this stuff.

So here I go. I want to take a tippman 98 custom with a response trigger and make it into a electric gun without using the e-bolt. I want to try and keep the rt in there but it is not a must. But that would be very cool if it could remain.

I also would like this custom work not to cost over a 100 bucks if possible. Maybe like under a 150 dollars, but lets keep it low.

So lets see if anybody can help me out with this. If you can reply to this thread. However if you would like to talk to me personally, email me at cjlidtke@aol.com

Thank you for your time and any help you can supply.

Fixed it enough to be readable.

But I had to take out a sentence or two since I had no idea what you meant.

Torch · July 18th, 09:34 AM

Unless you somehow enlarge the grip frame, or create a mini circuit board, there's not going to be much that'll fit into the grip frame with the RT piston in there.

For $150, I'd sell the RT for whatever I could get (50+ maybe?), take the total cash in hand and buy a used E-bolt kit.

But since you don't seem to care for that option, you're limiting yourself to sear-tripping electronics...probably either A5 or 98Pro or the more exotic route- spyder electroincs.

None of these will be drop in, and you've got some cutting and fabricating ahead of you.

I was toying with a spyder board and 'noid in a 98C, but stopped before I cut apart my gun because I saw it wasn't worth the work. Ironically, I've moved on to what seems to be an even more complex project with the same gun. =\

***tippmann98777*** · July 18th, 12:51 PM

what was that torch u did that was a harder jw and thank u for fixing up my mssage i realy appreciate it but i was wondering if ne one has like a picture of the internals of a 98 custom with a spyder or other electronic board and mabey even make stes i could do i guess i might have to get an ebolt but when is the 98 custom e grip coming out or the trigger in the e pro,,,, man some other companies should make new electronic system that is cheap and fits in like tippmanmodels they would be rich

**freakpizzaboy** · July 18th, 12:58 PM

^^^ dude, how old are you?

Torch · July 18th, 12:58 PM

Quit the Spyder board install because, like I said, I didn't want to cut up the gun. There was the chance that it wouldn't work at all, but that usually doesn't bother me.
From what I did have done, I figure it would work if someone put some hours into fitting all the parts.

The new project is an E-bolt 98C. Custom dual action ram, new board, eyes, new 'noid valve, QEV's, some other random excessive parts. Pretty much an all-or-nothing project. I haven't gotten everything in the mail yet, so I'm kinda stalled.

***tippmann98777*** · July 18th, 01:00 PM

pizza boy u arean ass so unlles u have somthithing good to say dont sayit

**Badlands** · July 18th, 10:20 PM

Quote:

Originally Posted by freakpizzaboy

^^^ dude, how old are you?

QFT.( If I can use it in this situation....)

**DAVE** · July 18th, 10:47 PM

Im gonna have to say what your asking is kind of impossible, like torch said there is just no room with the rt piston. I really dont understand why you would want to do something like this anyways, but oh well.
I'd take Torch's advice and sell your rt and buy a used ebolt.

and Torch it looks like you are making a super tippy huh?
Thats gonna be some work but it will be awesome when its finished.

This thread kind of makes me want to bring out my old BSI ebolt and fix its wiring issues and mill it some to make my own custom 98E.

Maybe I will

**freakpizzaboy** · July 19th, 04:18 PM

well your arean ass to so unlles you pay me somethithing ill kick your ass so dont sayit moron!

jtpaintballer31 · July 28th, 08:50 AM

Quote:

Originally Posted by freakpizzaboy

^^^ dude, how old are you?

hah hes gotta be goin into pre-k

Thread Tools

View more Paintball photos