Thread Tools

the-one · December 9th, 12:54 PM

yes i hav a gx-4 autococker and i love the gun. i hav gotten an e-blade 2 for it and now lookin for new parts to make it much better
people say i should get these:
Belsales .44 ram
Eclipse QEVs
Orracle ram
Slik Bolt
Slik Backblock
if u know about this please help me out thanks

Torch · December 9th, 02:34 PM

It should be adjustable. You can adjust the sear lug and on many models the trigger slack. You may have to adjust the timing as well. Check out the autocockers forum as well, there's information on the process in the stickies and they're helpful people.

**M4Maniac** · December 10th, 09:35 AM

I'm not sure exactly... but I think the GX-4 has an ANS frame. If so, you can adjust the trigger stop screw (the one right in the middle) but you will short-stroke alot if you over-screw it in.

the-one · December 10th, 11:20 AM

yes it is an ans fram sooo i will try that
also i am lookin for an eblade for it soo i can just get one of those put on and shot the way i want?
wat is the sear slug and also do u no how to time autocockers?
and i will post this in the autococker form also
thanks a lot u 2

anyone else hav any ideas?

**M4Maniac** · December 10th, 01:36 PM

Quote:

Originally Posted by the-one

yes it is an ans fram sooo i will try that
also i am lookin for an eblade for it soo i can just get one of those put on and shot the way i want?
wat is the sear slug and also do u no how to time autocockers?
and i will post this in the autococker form also
thanks a lot u 2

anyone else hav any ideas?

Get an Eblade. Trust me, it's SO worth it. You'll be ripping on your GX4 in no time. Also, it wont hurt to invest in 2 QEVs if you end up getting the E2/E1.

I cannot recommend messing around with the timing on your autococker. It is asking for a disaster if you do not know what you are doing.

Go to a shop w/ some cocker techs and have it professionally timed by them. Trust me.

the-one · December 10th, 01:41 PM

ight thanks a lot as soon as i get the $$ i will buy me one and talk to the shops that i go to and c if they no wat they r doin.
and yah thats y i havn't really done a lot to mess wit it lol bc i play but i don't work on my gun other then put things togeATHER AND clean it

ayone else?

**M4Maniac** · December 10th, 04:37 PM

Quote:

Originally Posted by the-one

and yah thats y i havn't really done a lot to mess wit it lol bc i play but i don't work on my gun other then put things togeATHER AND clean it

Yeah, that's the best way to keep your Autococker running at full steam all the time... All you do is clean it. Let the real cocker techs time it and stuff. But, when you do go, ask to watch so that eventually you can learn also.

RB · December 10th, 04:39 PM

Get an e-blade if you can manage to find one.

the-one · December 10th, 09:32 PM

yah i will do
and i tryin 2 find one now

the-one · December 11th, 08:48 PM

wat do u all think is a good price for an e-blade 1 and how much u think for an e-blade 2?
thanks a lot

**M4Maniac** · December 12th, 03:57 PM

Quote:

Originally Posted by the-one

wat do u all think is a good price for an e-blade 1 and how much u think for an e-blade 2?
thanks a lot

probly 150-200 for E1, and maybe 250-300 for E2?

since they aren't made any more. They are worth it, though.

the-one · December 13th, 08:13 PM

hey thanks

anyone else hav any ideas for upgradin my gx-4?
i just bought an e-blade2 any other ideas?

RB · December 13th, 08:33 PM

First a ram with QEV's. Then a LPR, maybe internals, a block and bolt kit, a regulator.

lots of things... Visit the upgrade sticky at the top of the cocker page in the 'ultimate sticky'

**M4Maniac** · December 14th, 07:28 PM

Quote:

Originally Posted by RB

First a ram with QEV's. Then a LPR, maybe internals, a block and bolt kit, a regulator.

lots of things... Visit the upgrade sticky at the top of the cocker page in the 'ultimate sticky'

RB speaks the truf.

oh yeah, you like the sig okay?

the-one · December 14th, 07:49 PM

ight i will look into that stuff when i get $$ again right now i poor since i bought that e-blade
and wat about ur sig?

**M4Maniac** · December 14th, 09:05 PM

Quote:

Originally Posted by the-one

ight i will look into that stuff when i get $$ again right now i poor since i bought that e-blade
and wat about ur sig?

oh, I made RB's sig and was asking if he liked it.

the-one · December 14th, 09:09 PM

lol oooo yag i do it is coo
also which of those things should i get next? out of all that stuff?

RB · December 14th, 09:15 PM

The ram with QEV's should prolly be first on the list.

And m98-love it man. Might get w/ you to do one for my auto forum (if you dont mind), but not sure. I'll get back to ya.

the-one · December 16th, 07:04 PM

could u all tell me the stuff and who u think maks the best stuff and for around how much i should try to go and buy it for?
thanks a lot
everyone is helpin me a lot

**JeSTeR_1269** · December 16th, 10:17 PM

Well, if you already have the blade...

Belsales .44 ram
Eclipse QEVs
Orracle ram
Slik Bolt
Slik Backblock
Black Magic reg or Palmers reg
Barrel kit (I like the Evil Pipe kit)

Thats how mine was set up anyway, before I had it halfblocked...
Pretty much the only place to find them anymore is ebay, forums, or some of the websites that offer mass quantitys of parts. Good luck