mikeeperez5

so I have my tippy 98c and i recently decided to go mad scientist with it so tell me has anyone else done this to let me know if this would work?

instead of writing a effing story basic questions:
-Does having the air through stock and remote act as an expansion chamber bacuase it would give the co2 time to expand?
-when i buy a HPA tank wht should i look into so i dont run it on too high of pressure?
-If i still need a expansion chamber or a reg cant i just screw on a ASA bottem mount then the reg\chamber then the remote?

Thanks

Mortisdeum

Mad scientist? No don't see one unless I look in a mirror.

the first question it does act an extent but not as well as a dedicated expansion chamber would. On advantage of the remote line is that it also can act as a trap for any liquid Co2 that might leave the tank. The only down side is the line will get caught in the brush a lot.

When you spring for the HPA tank there is not much that you need to worry about with a 98.

Yes you can screw most regs directly into a ASA and then take the fitting off the Remote connector and connect it to the reg

__________________
Tippmann Owner, Smartparts Owner, Spyder Owner, Autococker Owner, Pump Owner, Seridan owner, Automag owner... Gun Collector

Tippmann Mods:
Spring Loaded RT, Mirror Polished Internals , High Flow Valve, Full auto Mod
Smartpart Mods:
Ion Foamie
Scenario Gear:
Co-Axis Law Launcher, Foam Rockets, Mini Tanks, Paint Mines

mikeeperez5

heh Funny.. turns out that was a 2 way mirror...... ok and the remote problem has gotten me snagged a few times although it beats the heck outta havin the tank under the gun when playing leap frong with my buddy.

paint147

i like the cp regulator (or similar) if you go to low pressure because it will run both hpa and c02

martix_agent

I'm not all that cetian that a tippman can run on low pressure without a ridiculous amount of special work.

__________________

If your a Christian paintballer put this in your sig.

Another promaster for sale $100!

Trbo323

ya from what iv seen i agree with martix, they can but its not worth it, no better efficiancy, its still a blowback afterall, you dont need to go low pressure to run either, just get a high pressure output HPA tank, they have the same output of a co2 tank, so you tank the co2 off and throw the hpa on and go play.

gennerally though, if your doing this as a project marker fine go nuts, but if you want better preformance it is much better to start with a better base platform

__________________

blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off