Scottyy360

Can you put an anti-chop eye on a Dragun T.E.S and if so where can i get one from?

Thanks.

inkjt510

Dragun TESes come stock with eyes.

__________________
The Professor Is In The House

Live in PA? Looking for a team? PM ME OR POST HERE

666paintballer

ya, but the ones he is talking about have a break beam setup, where as the stock eyes have a bounce beem setup. The break beam is better because it can see dark paint.

if you want Anti Chop eyes, your going to have to probably get the gun sent out to get another hole drilled in the side of the gun

__________________

Scottyy360

ok thanks so will this gun still see most paint or whats up with that?


Thanks For All The Help.

666paintballer

ya, the stock eye should do fine, but it might have some problems seeing black/brown/dark purple shelled paint. Just clean the eye if you chop or you can just turn the eye off

__________________

Scottyy360

Ok thank you for the help.

Dudeus

what about dark blue paint?

__________________

An eye for an eye, makes the world blind. - Gandhi

Scottyy360

I know blue paint works i'm not sure about dark blue i think that works too though not sure, but i shot blue through mine and the eye read it.

hurdlebeast

Does the bounce beam sorta act like a sonar for colors, bouncing a beam of the wall of the feed, recieving the beam, and analyzing the color to see if it matches the color of the feed (and is that why it wont read dark colors, because the inside of the feed is pretty dark due to lack of light) And does the break beam send out a continuos beam, and only shoots when the beam is broken (hence the hole in the side of the feed)? I'm just guessing, i don't know how they work. (really, i don't)

EDIT: oh, i see now. i was right about the broken beam, but totally wrong on the bounce beam. thanks for the site, Badinflewinse.

Badinflewinse

http://www.scenariodreams.com/eyes.htm
should answer most of your questions.

__________________