I got bored one day and decided to make it so my hopper would agitate every time my piranaha would fire. If for some odd reason you have the compassion to do this now to you hopper...heres how:
What You Need
1)Basic 200 round hopper you dont want no more
2)Motor and Prop (say from like an old revvi with a broken shell...no suprise)
3)Screw driver
4)Rotozip, drill, or other device that can make a small hole.
5)Hot glue gun
6)Hot glue stick for the gun
7)Spare 9volt battery
8)Some wire
What To Do
Ill do this quick and simple because last time i had it as a full page it crashed my cpu cause it sucks.
1)Drill a hole in the back bottom area of ur hopper, in the center of it.
2)Drill a hole directly above the bottom one
3)Remove the Prop from the Hopper
4)Hot glue the motor to the Hopper
5)Put the Prop back on using that lid and the hole u drilled in the top
6)Find a cool place to stick the 9volt. I decided to put my sight rail on a vertical feed marker to use, so i taped it to the rail.
7)Take a wire from one of the outlets on the motor to one of the terminals of the 9volt.
8)Bring one wire from the remaining termainal of the 9 volt to the trigger frame and have it behinf the trigger.
9)Take the another wire and take it from the remaining out let on the motor to the back of the trigger, so that when the trigger is all the way back, the 2 wires will touch.
And that kids is all u have to do...heres a pic to help w/ ne questions...if u have ne other 1's feel free to ask or im me at cammopope.
*edit* seeing is u cant see the text to the side, here u go:
Green: The holes u drilled
Dark Blue: Motor and the rod that the prop screws into
Tan-ish: 9 Volt
Yellow, Red, and Light Blue: Wires
Ghetto intelli-feed thing in under 10 steps
