Thread Tools

**doubleblade91** · July 7th, 02:40 PM

I have no clue how to paint my impulse.
could u write all the steps for me?
thanx

**ghostkamikaze** · July 8th, 11:44 PM

it depends on how you want it done, cheeply and low quality or expensive and high quality. so which 1?

**doubleblade91** · July 9th, 03:33 PM

high quality

**Apache** · July 9th, 06:50 PM

there used to be a sticky on that in the Tippmann forum but then PBF got hacked

**JG.** · July 14th, 09:05 PM

Good instructions at Otter's Site

**ghostkamikaze** · July 14th, 09:32 PM

1st off u need 2 have anno completely off. use a surface prep and rubber gloves 2 get off oil, greese, dirt, or any debris. then use a sel etching primer as your first coat. do 3 or so coats of primer. then u need 2 find what paint you want to use. i used auto air base coat sealer dark with a saphire chamelion paint. 3 layers sealer and 2-3 chamelion. then use a clear coat to protect all your hard work. i would use lots of thin clear coats. maybe like 10 VERY thin coats. o and btw after every layer of auto paint you should use a heat gun to cure the paint before the next coat. dont use the heat gun on the primer or clearcoat thou because they are very flamable. it depends on the paint for the heat gun thou. auto air paint requires it

**Ryan_Page** · July 15th, 08:12 AM

there is a sweet thread on it, use search, i forget where it is.

Thread Tools

View more Paintball photos