How to Dye any plastic part (hopper, mask) w/Vinyl Dye Spray Can! Easy & Clean!
If you want to color any plastic part its so easy. All you need is to buy a $6 - $12 can of “vinyl dye”. This is the same stuff that auto places use to dye car interiors. Also it’s the same stuff they use to give plastic its color first of all. It is so easy to do!
How it Works!
Vinyl Dye seeps into the pours of plastic and dyes the plastics color. Unlike spray paint which attaches to the outside. Paint will peal eventually but dye is in the plastic and will stay.
How to Do It!
1. Get the part what ever it may be mask, hopper, etc. Remove
anything you don’t want painted (or tape them over).
2. Wash the part with soap and rinse clean. Let it dry well.
3. First coat should be about 75% covered. Let it dry for 15 min.
4. Second coat should be totally covered. Let it dry for 15 min.
5. Repeat step 4 until you get the color your looking for.
It’s that easy unlike spray paint that needs to be put on evenly. Dye if you do it wrong you just give it another coat and no one can tell. I have been doing this for years on my guns and computers (drives & cases).
Nrglift
If this helps you let me know!
Last edited by nrglift : September 26th, 2004 at 10:58 PM.
|
How to Paint / Dye any plastic part (hopper, mask)! Anyone Can Do This!
