marinebro0306

Hi,
I just got my T1 for Christmas. When I put air in it, the solenoid leaks from a hole on the side that the LCD isn't on (it's a hole that belongs there.). When I shoot it, it is fine for about a second, then it starts leaking again. I know you're supposed to tighten the screw on the LPR till it leaks then untighten it then the 1/4 turn thing, but it always leaks. I have tried numerous combinations with the HPR as well, and now it's all the way in, lowest pressure, and my gauge says 600psi. Also, after a few shots, the front block comes out about 2mm, and the oring in it is partially out on one side. I replaced the oring, and the same thing happens. Also, when I shoot like 3 times in a row, it doesn't shoot all the way, only about half, and the pressure goes to around 100 immediatly after shooting, then skyrockets again. I just replaced the battery, and I think the HPR isn't recharging quickly. Could anyone show me an exploded parts view of it? My dad says that the HPR adjustment screw is supposed to be pushing something in or out. Please read this and answer, I'm really getting frusterated.

Thanks.