Scottyy360

Im looking to do a little customizing to my Dragun T.E.S its all stock right now. So could you help me out by recremending some upgrades. I'm also looking for some custome parts like new grips maybe and stuff, but im not sure what will fit on my T.E.S. So I'll apretiate all the help.

Thanks.

¤COLD¤

better barrel like J&J,maybe a boomy,better bolt like a shocktech superfly

__________________

----------------------- ------------------------
ROCKING PM5
OLD SCHOOL AUTOCOCKER OWNER 16

Scottyy360

Ok now i have two questions will any bolt work for a dragun? And can you get an anti-chop eye for a dragun T.E.S.


Thanks.

inkjt510

No and yes. Only Spyder bolts will work with Draguns and the TES comes with eyes stock.

__________________
The Professor Is In The House

Live in PA? Looking for a team? PM ME OR POST HERE

Scottyy360

yeah i found that it had eyes after i posted, but it doesn't say anything about if it see's all paint. Do you know if it will see all colors or not?

quadz

my tes doesnt see black paint and some dark colored paint, in that case just turn your rate of fire down and turn off the eye

__________________
Dragun Owner #27


Black/Blue fade TES
Blue PMI flame drop forward~APM Products Tigershark bolt~Twist-lock clamping feedneck~CP Grip Regulator black short~CP ASA rail adapter on/off~CP blue thread protector~CP blue ball detent~CenterFlag 4500psi 72ci peanut~Dye Rhino tank cover~Blue Halo w/rip

Scottyy360

ok thanks.

Tex

Intimidator bolts also work.

There are no aftermarket grips available. What I did was I bought this rubber paint called grip and guard and I dipped the grips in it.

__________________
Dragun The One
Blue/Black Fade T1 Body
The One Kit
Hybrid Headlock Clamping Neck
Intimidator Feed Adapter
Spudnuk'l Xtra Bolt
Air America Apocalypse 2K Adjustable Air System
Dye Gas Thru Grip
Evolution 2

Buy my Pirahna PRO TS G3

Image Hosting provided by http://www.metatrox.net!

Scottyy360

huh! i'll have to try that out.

StealthRT

Timmy bolts work, but are not reccomended...

Alot of them will put the paint a couple mm further back inthe breech, and the eye will not see it and the gun will not fire...I reccomend the APM TigerShark bolt personally...its only $20, and works awesome..Oring-less, so theres nothing to lube...it fits perfectly and gives me no blowback up the feedneck...shiped out very quickly, cut down on kickback, lowered the pressure a bit, won't damage the breech...tons of good things about this bolt...its awesome...

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

quadz

What about the Spudnuk'l bolt for the TES? I plan on getting one, so does anyone know if they are worth the money?

__________________
Dragun Owner #27


Black/Blue fade TES
Blue PMI flame drop forward~APM Products Tigershark bolt~Twist-lock clamping feedneck~CP Grip Regulator black short~CP ASA rail adapter on/off~CP blue thread protector~CP blue ball detent~CenterFlag 4500psi 72ci peanut~Dye Rhino tank cover~Blue Halo w/rip

StealthRT

Its a good bolt, but its got orings, and its not available for sale anymore, company went under...

The APM is cheaper, and easier to buy, and its extreamly good.

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

quadz

Thanks, i ended up buyin the APM bolt instead

__________________
Dragun Owner #27


Black/Blue fade TES
Blue PMI flame drop forward~APM Products Tigershark bolt~Twist-lock clamping feedneck~CP Grip Regulator black short~CP ASA rail adapter on/off~CP blue thread protector~CP blue ball detent~CenterFlag 4500psi 72ci peanut~Dye Rhino tank cover~Blue Halo w/rip

inuendo69

PMed you

__________________
AIM:Camoman10
Matrix (black)ACE!-!!!Trauma Board!!!(owns ur board )-ND ACE Breach-Evolve bolt kit-SCM LPR-Halo B Victory Board-Evolve NO-rise-Dye Hyper 2 Regulator-Evolve Vert Frame-ACI Phat Barrel kit-45/45 X-Stream Tank(dye tank cover)- unimount-CP Snatch grip

MATRIX BOLT