CaliHunter

Im thinkin about gettin a T1 and i wanna know what problems anyones had with em. so post what problems you've ever had with your t1. thanx dudes.

__________________
_______________________
My Current Setup:

Black SP ION
Eclipse Q.E.V.
Freak back w/ AA front
XR clamping feed
CPR Rail
Empire Reloader//Egg2
Air America 68/45

Tex

Well with my t1 kit (same thing minus eyes), the front block leaks stock without teflon tape. The drop forward doesnt fit hpa tanks with large guages unless you shift it extremely far back. The bottomline uses nonstandard threads but it is possible to get a thread adapter, look on ebay, sometimes they are there. I have a suspicion that its a simple matter of going to a hardware store..

__________________
Dragun The One
Blue/Black Fade T1 Body
The One Kit
Hybrid Headlock Clamping Neck
Intimidator Feed Adapter
Spudnuk'l Xtra Bolt
Air America Apocalypse 2K Adjustable Air System
Dye Gas Thru Grip
Evolution 2

Buy my Pirahna PRO TS G3

Image Hosting provided by http://www.metatrox.net!

RegamircS042

It's not. Yett_ThE_Vett on SpyderZone searched for months and ended up calling the company. It's a freaky thread pattern from Indonesia.

The best thing to do is change the stock regulator with a Torp or a CP because the stock reg is known for shootdown. Then look into a uni-mount or a new drop. After that, maybe a new bolt. Timmy bolts fit....

__________________
Red 05 Proto Matrix


I heart (<3) Chocolate.

StealthRT

Actually the stock reg will perform just fine, infact I achived +/-2 with a stock reg and HPA. You really have to lube the **** outta that sucker. They do not come lubbed from the factory...

I have no leaky front block problems after 5 months of playing, but if you do its a very simple fix...

The one just needs to be gone thru and lubbed up well before using it the first time and it will work just fine for ya...

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

RegamircS042

Many people were *****ing about the stock reg. at the local field and how they were getting shootdown. I've heard different things about it though. I think a Torp looks better on a TES/T1 too.

__________________
Red 05 Proto Matrix


I heart (<3) Chocolate.

StealthRT

Shoot down is more likely related to the LPR instead of the main reg, both are equally capable of doing it, just that most of the time it seems the LPR is the problem on these guns...Lube the ram/sleeve, lube the regulator very well, and put a couple drops in the ASA and dry fire about 20 times and you should yield pretty good results with the stock setup....Like I said, I know very well +/-2 fps is achievable with a well lubbed setup...

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

evilgenius

Bad eye right outta the box on my T1 (it always thinks there's a paintball in the breach) other than that all it really needs is a new microswitch or a modded stock one, bolt (if you're picky) & a locking feedneck.

a_fat_man

I know you can use either hpa or co2 on the tes but is it ok to use co2 on the T1

__________________

Dark Timmy, function ramcap, asa, bolt, new style feedneck, lucky 15 barrel, cp reg, cp trigger, empire gen 4 1.5 borad

StealthRT

Yes it is...it works perfectly on co2, but the tank must be anti-siphon...There is just no reason to risk liquid in the noid, so anti-siphoned co2 will be just fine on T1. I'v ran mine with it for more then 5 months without a single bit of trouble...Lube up the stock reg and keep it well maintained, it works good with HPA but its a little flakely with co2. I reccomend the Palmers Stabilizer if you plan on running mainly co2...Cheaper route is the BL Torpedo, its also fairly good with co2..

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

evilgenius

You'll probably get some pretty mad shootdown

StealthRT

shootdown would be because of not lubbing the main reg, a crappy LPR, or a dry ram sleeve...the stock reg, when lubbed, and an automotive tire valve core in the LPR and I get no noticable shootdown under 16 bps...

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

evilgenius

nice, it must be low pressure enough that it doesn't out shoot the C02's expansion rate.

Zeddicus

Which feedneck? What brand, type, etc. For the One.

__________________
The One and only, Zeddicus
Total Defiance
Dead Men Walking
"The red button is always a good choice..."

evilgenius

ebay is really the only place I've seen one for T1. I put a timmy feed on mine but it doesn't fit as low as it could.