Thread Tools

**Dudeus** · July 13th, 11:05 PM

is there a front block that would fit a tes so you could plug the co2 canister derectly to the front block? and has a velocity adjuster too. because the stock front block does not have that thing that sticks out that makes the co2 come out of the canister. and it has to have a velocity adjuster because on the stock tes it is on the foregrip. and i like the way it looks and feels with the co2 thing right ther but it isnt possible unless i can do that. anyone who has a site that has these can you please pm me with the site or if you can make one can you hit me up on AIM or reply or pm me please. thanks

**CockerSk8er1777** · July 14th, 11:05 AM

u are the dumbst person i have ever seen frist frontblocks are for COCKERS only and sceond u paid money for a TES......lol

**Fastecho419** · July 14th, 12:02 PM

Give the guy a break man. We're not all airsmiths here. Jeeze.

**Dudeus** · July 14th, 12:31 PM

Quote:

Originally Posted by CockerSk8er1777

u are the dumbst person i have ever seen frist frontblocks are for COCKERS only and sceond u paid money for a TES......lol

what?

Lord Headley · July 14th, 01:44 PM

Hmm... try rewording this a little better. You might get a better answer that way.

P.S. Moving this so you'll get more hits.

- Brian

**Dudeus** · July 14th, 02:14 PM

ok ill use a bko to show where i want the co2 tank. but i have to have a front block that also has a velocity adjuster and i was wondering if anybody knos where i can get one like that. or if they could make one for me

**a_fat_man** · July 14th, 07:48 PM

not sure but the one off the spyder compact 2000 might work

**Dudeus** · July 15th, 11:41 AM

is the velocity adjuster (you know fps adjuster) on the front block on the compact 2000?

**Tex** · July 15th, 08:51 PM

Quote:

Originally Posted by CockerSk8er1777

u are the dumbst person i have ever seen frist frontblocks are for COCKERS only and sceond u paid money for a TES......lol

Uh technically the frontblock on any gun is the vertical asa and volumizer and/or lpr. Its just a more prominent term on autocockers.

You could buy a piranha or a spyder asa for $10 or so and put that on instead. Might not run as low pressure.

**StealthRT** · July 17th, 05:01 PM

Quote:

Originally Posted by CockerSk8er1777

u are the dumbst person i have ever seen frist frontblocks are for COCKERS only and sceond u paid money for a TES......lol

You sir, just took the cake for the stupidest person this week...

Frontblocks are on just about every single marker on the market...

Most people do pay money for a TES, whats your point???

You could just use an on/off tank adapter, like the Smart Parts one, to turn the tank on and off. I have however never seen a velocity adjuster on the front block...

See the velocity on this gun is adjusted by its input pressure (it doesn't actually have a velocity adjuster). So you might be able to use a cap from the back of a Spyder to adjust velocity once you have chosen the correct spring to use...This will however destroy any Low pressure hopes for the gun, as since you have no regulator now its impossible to lower your pressure (unless you used an adjustable HPA tank). So yeah, its way to much trouble then its worth...If I were you I'd just buy yourself a Spyder or something that has it already if its that important..

**Foxhound-TES** · July 21st, 07:55 AM

You could also go to Palmer's website, palmer-pursuit.com, and they sell ASA's with pins. I think they are around $5-10. They sell just about every air fitting you will ever need.

**Dudeus** · July 21st, 10:49 PM

nevermind bout this. im just stickin to my regular low pressure system. the only problem is IT DOESNT WORK!!! the reg (low pressure system) and the front block both are defective so i am trying to get a hold of dragun and get them replaced since it was a waranty and everything. hopin they go for it

**hurdlebeast** · August 20th, 06:10 PM

you gotta think about wieght distribution, if i understand what your doing. make sure your gun isn't too heavy in the front. if i don't understand what your doing, and talking total nonsense, someone please tell me.

**GBRudy16** · August 20th, 06:33 PM

remember the old vm-68's anyone? they are what I started out with rental wise, it put the co2 under the barrel. I prefer fron't heavy guns cause of that now. lol its possible sure, Would take a bit of tinkering and work but it could be figured out.

**Dudeus** · August 21st, 08:53 PM

it would be cool to have an extra one like this so i could switch it in like the middle of the day or something but anyway. it would ballance the weight almost perfectly. cuz the tank would be in the middle. but the only prob is that i would have to find a front block with a velocity adjuster on it which is pretty rare i think. but ruby your startin a shop so you should kno some guns shouldnt you? do you know any gun with this?

**StealthRT** · August 21st, 09:25 PM

There is no way to do this to a TES. Its a big waste, just buy a spyder if you want to do this....The way the velocity is adjusted is completely different between a TES and Spyder. The TES has to have some sort of regulation, and without a regulator, this isn't possible...

**GBRudy16** · August 22nd, 12:31 AM

are you talking about running the bottle verticle or horizontal? and I would maybe think a compact's piece would work, I don't know enough about tes' where do you adjust velocity at on them?

**Dudeus** · August 22nd, 12:42 AM

vertical. and the velocity adjuster is on the reg. which is the foregrip. thats the problem

Thread Tools

View more Paintball photos