s6ply9s

what drop would be long without droping the tank down too low. i want to move the tank forward at least 2 inches but hopefully more but not drop it more than 2 inches down. also it must look good. thanx

__________________
i have dragun tes and need upgrades. pm with links to best upgrades.

StealthRT

look are some shocktech medium drops, they sound like they would fit your needs and their quality is great

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

pball4sissies

warning, the asa screw holes for the TES have a different length apart then most american guns.

__________________
dm3 // tadao 5 - m3 // dye boomstick // empire - some asa // new dye lpr and hpr // cp roller // hybrid contract killer grips // ccm pro rise // ghetto top hat mod and leethal mod // egg - z boarded // WGP 72/45 tank

WTB evolve v1 for dm3 .. also looking for a cheap halo ..

StealthRT

What the heck are you talking about? Do you mean their spacing apart? Is so, thats wrong, they are the same lenghth apart as any other gun (besides spyders). If not, do you mean the actual lenth of the screws? You always resuse your stock ones anyway...

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

pball4sissies

oh, i thought they were a different length apart then most american products. sorry. <3

__________________
dm3 // tadao 5 - m3 // dye boomstick // empire - some asa // new dye lpr and hpr // cp roller // hybrid contract killer grips // ccm pro rise // ghetto top hat mod and leethal mod // egg - z boarded // WGP 72/45 tank

WTB evolve v1 for dm3 .. also looking for a cheap halo ..

Hotdog

you just need to pick one you will be comfortable with. go to a shop with your marker and see what will work best for you.

i put on a pmi flame drop on my tes and it was more work then it was worth. you can't just get a drop with an on/off due to the braided line fittings being some retarded small size that there is no adapter for. also to use the stock asa the track that you slide onto a normal drop forward is to big and needs to be filed down quite a bit in order to work. your best bet if you want a good drop is to replace your reg at the same time and put macro line on it.

__________________
Angel 4
Halo

s6ply9s

i have a cp reg and a long shocktech drop wit an on/off in it and i like it. the screws matched up wit out a prob.

__________________
i have dragun tes and need upgrades. pm with links to best upgrades.

|AC|METAL|

System X Cradle did it for me

__________________
"the baddest of the baddest"
__________________
Dragun TES:
Black fade Black
Bob Long Gauge
Freak Jr.
System X Cradle
Bob Long Torpedo
Viewloader "egg"
PMI 68ci/4500
JAM bolt
Click Here