paint squirrel

I wanna get a bolt 4 my 2003 black drag lcd and i want it to improve the performance on my gun.

I was lookin at this bolt
http://www.pbreview.com/products/reviews/863/

But i was also lookin at the tigershark
http://www.pbreview.com/products/reviews/2869/

This is another bolt that looked good [supafly]
http://www.pbreview.com/products/reviews/1970/

I kinda like the bandit better but i can only find it at one store and its over priced there. Wat do u guys think is a better bolt or is there any others u think r better?

20bps_tes

get the tiger shark its really nice and cheep too

__________________

Jamo_asleep

how hard is it to install?

StealthRT

umm...about as hard as any other bolt...you pull your bolt pin up, remove old bolt, pull pin completely out and reinstall in new bolt, insert bolt into breech, push pin into ram/striker and your done...

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

Jamo_asleep

yeah i ment any bolt, im wondering if i want to do this to my gun when i get it

StealthRT

yes, you definatly want to do this when you get your gun. Besides a good lube to lube the stock reg when you get your gun, this bolt is the next best buy for your gun...

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

Scottyy360

Yes you defenatly want a new bolt, but i have to disagree with 20bps_tes for once i happen to like the shocktech superfly bolt and thats what im getting!

20bps_tes

hehe i have a superfly in my tessy too

__________________

DeViLs_SouL

i hope this answers ur question:
Timmy Vs. TiggerShark

__________________

Scottyy360

Well of course i knew you would have the very best for ur tessy i mean come on u have to treat em like there ur kids for crying out loud. Don't matter if u have any or not cuz ur gun is just like one!

20pbs_tes are u happy with ur superfly bolt?

StealthRT

You have to be kidding! The APM bolt rips the Superfly all the peices...The superfly is heavier, only wrapped in delrin, and it doesn't always make a nice tight fit inside every single bore...

The APM, although oring less, makes an awesome fit, with no blowback in the feedneck. Its also very light weight, made of nylatron, not delrin, all around performs much better when tested head to head with...

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

paint squirrel

Which bolt will give me the best performance increase?