Thread Tools

**dirtrider54** · July 18th, 02:29 AM

I cant teh LCD screen on my TES to work.... its just blank and shows all the bars.... help me!!! which buttons do I need to push where?

**20bps_tes** · July 18th, 06:48 AM

try a new battery other then thatpush bottom button hold so it turns on the hit the top button 2 times this will get u to auto 10, now push the bottom button then tap the top one 10 times now ur at auto 20, push the bottom button one more time to lock it in this mode once u do that enough it will get programed in ur head and u wont even have to look at the gun hehe

ps. dont u just wish there was memory on the tes boards so u dont have to set the marker every times its turned off

**dirtrider54** · July 19th, 08:08 PM

we had to put a new batterie in it cuz the last one just died and then we put a new battery in it and it still doesnt work, plus were going to be playing some tournys so we cant use auto in them!!! and we just want to be able to see the writing on it all we can see is the little bars!!! has this happened to anybody else, its happened before and we accedintaly fixed it, I think we pushed the buttons to the sides or something

**iceman32cr** · July 20th, 08:37 PM

did you try holding the bottom button in and waiting for it to boot up......

Jamo_asleep · July 20th, 09:34 PM

did the marker come with a manual? i dont know cause i havent got my tes yet. take a look at it and see what it says.

**iceman32cr** · July 21st, 06:09 AM

i think its a joke.....

**StealthRT** · July 21st, 07:05 PM

Auto is not full auto BTW

The auto setting is perfectly legal for tourney use...

You have to hold the button down for like 5 seconds until the board actually turns on and stays on...you are doing this right....?

**Scottyy360** · July 21st, 07:38 PM

Once again listen to him ^^^^^. For one like he said auto is not auto is semi, but its a lil quicker than the reqular semi.

Second you have to hold the button till it comes on and says Dragun Safty, you'll have to hold the button for about 5 seconds.

**chronic** · July 23rd, 01:42 AM

Were not complete idiots (Im on this kids team) and yes we are doing this right (I used this gun for a tourney already so I know how) but for some reason all it shows is the bars.... it wont say Dragun Safety or anything... it still shoots but we cant get the LCD screen to read out... any ideas there?

**20bps_tes** · July 23rd, 09:58 AM

Quote:

Originally Posted by Scottyy360

Once again listen to him ^^^^^. For one like he said auto is not auto is semi, but its a lil quicker than the reqular semi.

semi on tes board = less then 1 shot 1 pull

auto on tes board = true semi

if the auto mode on tes were to be a lil quicker then true semi to would not be legial(sp) hence its adding more then 1 shot per pull, semi on the tes boards is just crap

Jamo_asleep · July 23rd, 01:06 PM

Quote:

Originally Posted by 20bps_tes

semi on tes board = less then 1 shot 1 pull

auto on tes board = true semi

if the auto mode on tes were to be a lil quicker then true semi to would not be legial(sp) hence its adding more then 1 shot per pull, semi on the tes boards is just crap

I dont understand.

**Scottyy360** · July 23rd, 02:07 PM

Quote:

Originally Posted by 20bps_tes

semi on tes board = less then 1 shot 1 pull

auto on tes board = true semi

if the auto mode on tes were to be a lil quicker then true semi to would not be legial(sp) hence its adding more then 1 shot per pull, semi on the tes boards is just crap

Well thats kinda what i ment i just didn't say it right i was just telling him what they said in the manuel is all.

You must have damanged the lcd some how i don't know how mutch of a hit it can take? Do you 20bps? I have taken to tourny grade paintballs to my grip and nothing has happend. Did you leave it out in the heat? Did you have a magnet around it?

**chronic** · July 23rd, 06:00 PM

No its done this before... It still shoot and everything so its not damaged..... somthings just been pressed wrong...

**Scottyy360** · July 23rd, 07:31 PM

NO!!!! What i am saying is that the lcd screen could be messed up it self, if the screen is messed up it will still shoot cuz its in the setting that you put in its just you can't see it! This could have happend from heat or a magnet could have messed up the lcd screen were not talking about the damn chip, just the screen!

**StealthRT** · July 23rd, 07:36 PM

Yep, sounds like your screen has been jared from your LCD board, or perhaps the LCD board itself is shorting out or broken. Make sure its seated correctly, and try pressing down lightly on the corners of your screen to see if it suddenly starts working again. Or just order a new LCD board from dragun...

**Scottyy360** · July 23rd, 08:41 PM

^^ yep he has the answer!

**chronic** · July 25th, 08:10 PM

hmmm alright so it could just be jarred loose? Ill try pushin it down onto it...

**Scottyy360** · July 26th, 10:54 AM

Quote:

Originally Posted by chronic

hmmm alright so it could just be jarred loose? Ill try pushin it down onto it...

Yeah try that if it don't work most likly your lcd screen is shot.

I'm not sure how mutch the screen would cost? So just look and ask around if its just not jarred.

**chronic** · July 31st, 02:50 AM

not jarred..... but its sold.....

**dirtrider54** · August 14th, 05:58 PM

yeah you jackass you sold it to me!!! I want my new LCD screen you screwed me over I hate you