Tex

Thinking about buying an autococker hinge frame and gutting it except for the trigger assembly.

__________________
Dragun The One
Blue/Black Fade T1 Body
The One Kit
Hybrid Headlock Clamping Neck
Intimidator Feed Adapter
Spudnuk'l Xtra Bolt
Air America Apocalypse 2K Adjustable Air System
Dye Gas Thru Grip
Evolution 2

Buy my Pirahna PRO TS G3

Image Hosting provided by http://www.metatrox.net!

Eltrut

ooooo sounds interesting, show us if you go through with it

__________________
And if your friends ask you to go graffiti-ing again, tell them, no thanks, I don't like salad.

blank879

can someone help me with the modes of the tes. like on the lcd screen.

Hobo_Joe_II

How do you adjust the LPR?

Tnx Hobo Joe

Hobo_Joe_II

Got it, .
Made all my adjustments to my T1, should be on traget now for a game.

One thing tho, I hear gas on every shot. Not sure if thats the gas leaving the tank (first gun) or if its coming out by the RAM thing at the back. I think that it is the RAM thing. Any advise?

[^_^x]

might be ur solenoid leacking. open the grip and check. its that rectangle thing on the top. if it is leaking slowly turn down the lpr till it stops then 1/4 more of a turn.

Blank I PMed you a link.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe_II

It only happens when I shoot. Once I pull the trigger I hear a rush of air. Its not affecting the rof. Could it not just be the air going into the ram.

[^_^x]

hmm not sure. Id have to hear it. It's probably nothing tho.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

[^_^x]

btw the modes on an unlocked T1 are:

Nitro - its like full auto once you shoot faster than 4-5 bps.
Multi - This is burst shots supposedly I havent gotten it to work.
Auto - its the same as semi unless you take the eye out.
Semi - The stock mode which fires semi as the name implies.

I unlocked my board but only to see if it worked. Those were my results. I used a paperclip instead of the diode. Im taking it out after I show my friend and shoot another. Multi might work with the diode but for somereason it didnt work for me.

Does anyone know the model or type of the diode is? I might pass by radioshack today.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

[^_^x] - Thank you for your investigations.... and
BUMP
This thread is dropping off

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

StealthRT

Multi only works with the eye out also...just like full auto..

__________________
Evil Dragun The One, Blue/Black
Evil Pipe Kit, Evil Timmy ASA + Detonator + Respirator, 50g trig, Clamping Feed, Delrin Timmy Bolt, CP Pro Rail w/CP on/off ASA, QEV, Halo-B, 3A 68/4500.

Black 2k3 Vision Impulse
CP Barrel Kit, Cricket Board, Centerflag Hyperflow Reg, Evil Hammer, NDZ Valve, Palmer Micro Rock LPR, E-Blade Trigger, Sure Fit LOW Rise Clamping Feed, Black Evil Delrin Bolt.

Green/Black Black Magic Autococker
Freak kit, 04 Orracle internals + Front Block, QEV's, Flame Hinge.

Hobo_Joe

What u mean by that... the eye switched off? Or removed?

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

[^_^x]

he means removed. I might take out my eye. I usually have it off anyways.

Anyone know how hard/Easy it is? I was thinking of just dissconnecting/cutting the wires that go to it and putting a switch on it so it would be true on/off.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

[^_^x] - u mentioned in another post how u removed the eye... can you post it here.... need to keep this thread going.

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

[^_^x]

sure thing. I already removed it tho so I cant put up too many pics. Ill dra a diagram of what I did.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

Great the more thats in here the better. Once its done if TEX can add it to the first post.

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

[^_^x]

Here is a picture I drew of the second board and what the connections are supposed to be. I think it makes it easier to understand what goes where.



Before getting started remove both grips from the sides. Then unscrew the LCD board which is on top. Gently pull the board up to remove it.



In this Image you can see the actual second Board as you can see (or not) I used a paperclip to use as a jumper from the 1st to 3rd inlet.



This is the Eye Board and what you need to take out. It has 4 connections on it. One comes directly from the eye and the other connections lead to the second board and relay the trigger and battery connections. Be careful when removing these.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

Thanks mate, saved a few useless threads ... is that the third board?

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

[^_^x]

Yes the eye board is the third down. but you unscew it from the other side.

Here are some sound clips of 25 bps gassed and ungassed.

http://battsmusic.250free.com/sound_...5bpsGassed.mp3

http://battsmusic.250free.com/sound_...psUngassed.mp3

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

seccond one doesnt work... too big for ur account

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1