Thread Tools

**SupahFly21** · October 7th, 11:02 PM

be careful, dont want to break it

**[^_^x]** · October 8th, 03:47 PM

if you want full auto you need to dissconnect the eye board. you dont really have to take it out but I did because its pointless to be in there if its not connected.

Tes doesn't have nitro I think. You can have aut and multi but im not sure. If you dont have the eye board dissconnected then Multi is useless but auto will allow more bps because it checks for trigger pulls more frequently.

**blank879** · October 8th, 03:57 PM

hmm.

i think i understand.

so if i completely take the eye board out, i can have full auto?

im gonna chop like hell though cause i dont think my egg will feed 20 bps. even though it is z board'd

**blank879** · October 8th, 04:23 PM

ok taht didnt work, that only left me with semi.

**20bps_tes** · October 8th, 10:49 PM

did u completely remove the eye board and plug the trigger and the battery into the main board?

u cant just unplug the eye. u have to take the eye board out of the frame

**blank879** · October 8th, 10:57 PM

yes 20. i did all of that. i have a brain.

**20bps_tes** · October 9th, 12:02 AM

Quote:

Originally Posted by blank879

i have a brain.

humm really. care to explain why u can't get full auto to work 0?

hehe

**blank879** · October 9th, 12:42 AM

lolz i dont know. all i know is that after i disconnected the eye and took out the board, when i plugged the battery and switch into the main board, i only had semi. and had to turn off eyes to shoot it, well click it.

**Hobo_Joe** · October 9th, 12:06 PM

u sure the diode is in the right place?

**20bps_tes** · October 9th, 02:39 PM

well man take the eye board out connect ever thing to the main board and make sure the diode is in the 1st and 3rd like unlocking a T1 board. also u might have the diode in back wards? current can only flow through it 1 way

**blank879** · October 9th, 02:41 PM

remember this is a tes. the diode was already in the 1st and 3rd slot

**[^_^x]** · October 10th, 03:21 AM

diodes can only flow one way? My paper clip is more hightech. it doesnt matter which way you put it in. =D

**20bps_tes** · October 10th, 03:41 AM

it don't matter for a paper clip. or anything metal. the diodes I'm referring to have a lil black capacitor on them that only lets current through 1 way

**jordin** · October 13th, 12:05 AM

wow crazy i got it to work and it is fast as hell thanks all for the help

**jordin** · October 13th, 12:15 AM

wtf for some reason the board got hot i think i almost fryed my board what happened

**blank879** · October 13th, 12:21 AM

howd u get it working!? im gonna try l8tr again. did u have to hook up n e air to get it workin?

wait a minute. do u plug the eye back into the main board, or do u jsut leave it un attached and hangin there

should i replace the stock diode (already in 1 and 3) with a paper clip

**jordin** · October 13th, 12:28 AM

you have to take the trigger wire clamp and the motor thingy clam out of the eye boardand the other 2 things out so all you have is the eye board and nothing conected to it and take the first to clamps out of the main boark and put in the trigger clam in the the battery clamp in and there you go i wish i have a digatel camara i could show you but i would not do it my main board got hot for some reason

and no need to use a paper clip and no you dont plug the clamp thing in anything it just hangs there

**blank879** · October 13th, 12:30 AM

you need a typing class, and some periods and commas!

**jordin** · October 13th, 12:35 AM

but i have noticed with it fully auto i can get 30 bos in auto

**jordin** · October 13th, 12:35 AM

yeah i am busy 1 min and i will draw it for you mabe it will help and dame i am trying to help you and you complane