pball151

i was wondering how to have my trigger have less play. I saw a video and the guy said that u can set the trigger to make it less sloppy. Or is my only choice getting a different trigger. Thnx

Hobo_Joe

What?
Do you want to make it lighter or get rid of the play in the triger?

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

a_fat_man

to eliminate the forward back play take the trigger frame off the gun and there is a hole in the back side of the trigger(its kinda hard to see). Stick the largest allen wrench in the tool kit that come with the gun in the whole and turn clockwise.

To eliminate side you can either take the trigger hinge pin out and get some plastic washers from your local hardware store or if your cheap like me you can leave the trigger on and just wrap some wire on each sdie of the trigger between the trigger and frame.

__________________

Dark Timmy, function ramcap, asa, bolt, new style feedneck, lucky 15 barrel, cp reg, cp trigger, empire gen 4 1.5 borad

jordin

that is what i did lol i just did somthing like that 3 days ago but with some paper stuff

__________________
Marker Setup:Black/blue Dragun T.E.S.-egg2 w/z board-2 20oz Co2 Tanks 25g switch mod.
JT Flex 7 mask and full dye c4 cloths

[^_^x]

There are images I posted on how to adjustthe trigger on Tex's thread.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

pball151

Hey i wanted to get the play out of the trigger.. Thnx A Fat Man I will do that. Does the side to side play mess up the walking of the trigger... Also, Does that screw get loose after awhile

pball151

O i forgot those pics dont for me.. Idk y

a_fat_man

Mine hasnt come lose and if you put too many spacers on the side it will. the side play isnt too bad so you really dont need to put any spacers in unless you think its necessary.

__________________

Dark Timmy, function ramcap, asa, bolt, new style feedneck, lucky 15 barrel, cp reg, cp trigger, empire gen 4 1.5 borad

pball151

K thnx.. Wat does ur PSI read at. I keep mine around 500 cuz then it burps and doesnt cock and all that. But i recently got a tigershark bolt. Can i mess with my PSI.
Some of the other guys r readin aorund 700. J/w

a_fat_man

mine is a little under 500 PSI and I havent had any problems with it burping

__________________

Dark Timmy, function ramcap, asa, bolt, new style feedneck, lucky 15 barrel, cp reg, cp trigger, empire gen 4 1.5 borad

20bps_tes

lube ur reg. try a light main spring and stretching the sear spring abit. this should help ur burping problems. also bring the psi down abit below 400

__________________

pball151

No mine gun doesnt burp anymore i have had to keep it on 500 cuz anything else it gets screwed up

Hobo_Joe

500 sounds high.... dunno about the TES but Im running my T1 at around 200-250psi... 20bps will know whats right, he is the TES master!!!

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

|AC|METAL|

TES should opperate roughly at 425 - 450
mine has been up too 780 and still works

__________________
"the baddest of the baddest"
__________________
Dragun TES:
Black fade Black
Bob Long Gauge
Freak Jr.
System X Cradle
Bob Long Torpedo
Viewloader "egg"
PMI 68ci/4500
JAM bolt
Click Here

20bps_tes

yeah if u have the stock bolt still in the tes u need to run higher psi. around 400 like |AC|METAL| suggested, u could upgrade the bolt it will allow u to drop the psi down and still have a good fps. i use to run my tes at 200psi w/ apm bolt and maddmans green spring getting 280fps when i owned a tes

__________________

Hobo_Joe

20 is a big boy now

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

pball151

Well thats y i was asking. I have a Tigershark. ANyways will spyder dye3 sticky's fit on the tes or we have to wait intill they come out.. Does any have info about those.

islander

You wrote: "Wat does ur PSI read at. I keep mine around 500 cuz then it burps and doesnt cock and all that. But i recently got a tigershark bolt. Can i mess with my PSI.
Some of the other guys r readin aorund 700. J/w "

Not sure if this may help:
when I was at 500psi, I was having the same issue. I found out it was my cup seal. The high pressue stripped the pin out of the cup seal's threads. This occured twice before I realized it was the issue - missing out on the last 2 games, 2 outings in a row. How did I know it was the cause? Well, natuarally after each outing, I cleaned my gun and found a broken cup seal. but to further troubleshoot the issue, I lowered my pressure to 300psi, then to keep my velocity up, I simply cut a 1/2" peice of macroline and used as a spacer between the main spring pin and the rear cap. I now shoot consistently 294fps. Oh yeah, and no more burping and de-cocking. Note, 294fps for tourney, 278fps for recball.

[^_^x]

Nope your stuck with the stock grips. No one makes grips for the t1 or tes. You can rubberize your own grips with rustoleums rubber spray or just spray them with normal paint. If you do just want them a solid color spray them from the inside.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

SupahFly21

its easy to paint them just tape up the ends and spray away

__________________
-I dont Paintball anymore, but I enjoy watching, talking, and helping people with it.
"If you confess with your mouth that Jesus is Lord and believe in your heart that God raised Him from the dead, you will be saved." (Romans 10:9)

--I have a blue, small, CP Regulator (Spyder threads), that I want to give away because its the last paintball item I need to sell. You pay shipping plus 10 dollars and it's yours. PM me.