hotmikemanguy

hey my tes for some reason just wont recock any ideas?

20bps_tes

more info would help. when u fire does the marker even make an attempt to recock or does the bolt just stop dead. whats ur psi at? and does ur maker have any upgrades

__________________

hotmikemanguy

the marker is stock it does not even look like it made an attempt it just stops short. I have it set in the green and have fluciated it too see if it makes a difference but it has had the same end result.

jordin

ok first it should be set at no more than 400 psi the green it to high try a harder main spring oil you bolt and get back to me

ow yeah and make sure that every thing in in the gun right like a o ring is not missing or the cup seal is not broke or in rong

__________________
Marker Setup:Black/blue Dragun T.E.S.-egg2 w/z board-2 20oz Co2 Tanks 25g switch mod.
JT Flex 7 mask and full dye c4 cloths

hotmikemanguy

ok i did all the chck ups u meantioned also i forgot to mention when i take off my air source there is like 10 shoots left is that normal?????? but yeah also whats with the dwell???? i set it at six bt i donno what it does i am thing thats it or soemthing if anyone knows whats going on please help me

20bps_tes

ok so i take it u got the marker firing? the dwell is nothing dont worry about it leave it set at 0ms.

__________________

hotmikemanguy

no i did not still not recocking but i have some new news that may help i take out the bolt and it recocks????

hotmikemanguy

hey 200 bps u seem to be the one that can helpm me can u get on an instant messanger

20bps_tes

ok man on msn!

__________________

Hobo_Joe

imagine 200 bps.... one hopper.... one seccond... **** that far too expensive!!!!

Oh and good choice Mike... 20 is the super uber clever Dragun MASTER ( i believe he is working on takeing the guru status from RTStealth ) :P

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

Blood in My Eye

did you get it fixed??.....if not then the ball detent could be the problem. if it is, then this isnt good. it would mean that your detent was screwed in too far and the fitting that holds the ball bearing in it is exposed in the cahmber which can REALLY keep your gun from recocking and scratch your bolt...not good. Check that.

SupahFly21

i dont think that would be the problem cause ball detents are soft, that wouldnt happen

__________________
-I dont Paintball anymore, but I enjoy watching, talking, and helping people with it.
"If you confess with your mouth that Jesus is Lord and believe in your heart that God raised Him from the dead, you will be saved." (Romans 10:9)

--I have a blue, small, CP Regulator (Spyder threads), that I want to give away because its the last paintball item I need to sell. You pay shipping plus 10 dollars and it's yours. PM me.

Blood in My Eye

it happened to mine when i tried screwing it back in

hotmikemanguy

ohh i will have to check that w/ the detent but i think it has somehting to do with the regulator or i had a frined with the same problem and dragun said it was soumthing with the selonide

Avenger1000

take it apart, check the o rings springs, detent, look down the tubes to see if there are any obstructions.

__________________

SupahFly21

lube it up and then play again

__________________
-I dont Paintball anymore, but I enjoy watching, talking, and helping people with it.
"If you confess with your mouth that Jesus is Lord and believe in your heart that God raised Him from the dead, you will be saved." (Romans 10:9)

--I have a blue, small, CP Regulator (Spyder threads), that I want to give away because its the last paintball item I need to sell. You pay shipping plus 10 dollars and it's yours. PM me.