[^_^x]

Well I reinstalled my eyeboard yesterday. (Im hoping I got the wiring right) I tried it with no Gas last night and everything seemed to be working fine. This morning my Battery was dead. I took off the battery and tried to connect a new one. When I try to connect it it fires once. Well anyways I powered up my gun I put on c02 and started adjusting the reg when i noticed the air wasnt hissing out of the solenoid it was hissing out of the body. So iI dissconnected the hose that goes to the ram and discovered the air was going straight there.

Im gonna try rewireing it.IIf anyone can take a picture of the stock wiring that would help. II know i put some up here but ther all off what the board is supposed to look like after all the alterations.

Im also hoping its just a wiring faulty since the battery died on me and it fires when a new one touches the connector.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

[^_^x]

yep i removed the eye board again and it works... w00 solenoid isnt broke. Anyways can someone take pics of the stock? I kinda miss my eye although I havent chopped. I want it back to semi and nitro only.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Dudeus

got no digi so i cant take pics but that happened to me but my microswitch is screwin wit me so idk. it works now, and it doesnt work then. its freaky how unreliable it is (i still love her though)

__________________

An eye for an eye, makes the world blind. - Gandhi

[^_^x]

can u draw a colored diagram? =D

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

Which wires you want?
The ones in the eye board? I cant draw it and there is no way I am taking it apart again.... but the top left of the middle board has no connecter.... hope that helps.

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

[^_^x]

canu tell me the color of wires going down the middle on top to bottom?
and same for third board. It would be much help.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

20bps_tes

ok on the eye board. the first one is the eye, second one is the wire that connect the eye board to the main board. then its ur micro switch and finally ur battery.

on the main board the top marked sol is open. one down from that is ur battery then trigger and at the botton is the noide...

ps. ur trigger wires are white and black, battery wires are red and black remember this when connecting the eye board to the main board

u have my aim, shoot me some lines if need more info

__________________

[^_^x]

w000. She can see again. I think I had the trigger and battery switched on the eye board so it would power on but fire when the battery was touching it. It was opening the solenoid and keepig it open which is why the bolt would stay in a forward position.

Im pretty sure thats what happened. Anyways thanks alot for the help. Im gonna test her out tommorow as soon as I go buy some paint.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

That sounds like my prob when I tried to do the paperclip mod

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

[^_^x]

ya I read yours. Did you remove the eyeboard too? thie pics ii posted show hwo the wiring is supposed to look after taking the eyeboard out. Ill post up a pic of how it looks stock later on.

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

Na the eye board was left in...... dont want that out.... if the air is off the Nitro works but gas it up and its pooped

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1

[^_^x]

what did u use for a jumper? Paper clip? cuz if so make sure its not touching anything else and that its in the right whole. check yor wiring just in case. you might have pinched something

__________________


Dragun "The One"
Black/Green Fade
Dye Excel Barrel 14"
Halo B w/ Rip Drive
1337 Remote Control Setup (Limited Time only).....

32 Degrees Rebel 02 Electronic Vertical
Black
Dragun Stock Barrel 12"
Gravity Fed Hopper

n00b Gun Package Under $90

Hobo_Joe

Ok got it working and DAM.... explainned in my thread!!

__________________
Marker = Dragun "The One". #19

=-if you followed these instructions you do so at your own risk, Hobo_Joe, the author takes no responsability for your stupidity in listening to ppl on the internet

Please rate my T1