Thread Tools

**pbpro115** · January 30th, 04:39 PM

k, my freidns TES sucks balls, like most of urs, it does the SAME thing all my freinds TESs do, the bolt wont recock after being shot IT HAS NOTHING TO DO WIHT THE SEAR, cause when i recock it it shoots, but it has to be manually recocked, how do i fix this, and will Dragun take it back if i cant fix it....Im very displeased with Dragun, after reading most of ur guys posts, most TES owners have the leaky front block problem i have, and the BOLT problem.

**Dudeus** · January 30th, 06:55 PM

dragun went under. if you send ur tes in good luck getting it back.

yea mine has those problems too. thats why i got a new gun

**SupahFly21** · January 30th, 07:02 PM

i dont have either of these problems.
what psi are you shooting at? Need more info
like does it burp? or just uncock?

**ToridXFast** · January 30th, 08:19 PM

yeah mine did that when i lubed my reg i had turned it all down and then i went to chrono it at the filed and remembered it didn't have enough psi to shoot and recock so trn it up a little or lube your reg, i dont see andy other problems my odyssey torid x works perfect all the time not a problem you need to think and learn proper maintance and tweaks then see if it is a major problem odyssye may be able to fix it for a fee, same guns basically.

**20bps_tes** · January 30th, 08:32 PM

ur simply having a recharging problem. try taking apart the reg and properley lubing it, also use A light main spring, so the marker does not have to try as hard to push the striker back, polishing the internails and getting and aftermarket bolt is also a good idea. his tes is having probelms becuz of the user not taking care and properley lubing /cleaing his or her marker, or just plain does not know what hes doing in the first place. jeezus christ dont blame the marker

tes's are not good guns for ppl that are new to the sport and have no clue how a blow back funtions / works, ill agree that most tessys will come out of the box with problems becuz mine did too, befor i even aired it up every thing from the reg to the bolt striker were properly lubed by me hence the factory does not really do a good job. seconds later i was shooting ropes take care or ur marker and it will take care of u

**pbpro115** · January 31st, 12:02 PM

no i read these prblems all the time from u guys, and i really pissed off, cause it happens to everyone, dont say im not taking care of it, cause ur right im not, its not my gun why would i, but it still pisses me off how unreliable it has proved to be, anyways, i hope u guys are right, i will try to fix it, thanks for the advice

**ToridXFast** · January 31st, 04:13 PM

i have not read about it not recocking well then teach your friend maintance of his gun how and where to lube and clean and, what typ of quick light lube to work that won't build grime, and get the right type of lube fore your reg its like i have the dye lube it is real thick get that fromt he pb store its lick 7 bucks but beleive it or not a well lubed reg makes a differnece less drop off and more consistency, read the guage and make sure the reg is turned up enough to even reccok, and enlighten people of proper maintance and care and you wont be pissed off by small problems

**pball151** · January 31st, 08:54 PM

why are you complaing..? we are happy about our guns.. do we go and rag about how much your gun sucks.. no stfu

**SupahFly21** · January 31st, 10:21 PM

Quote:

Originally Posted by pbpro115

no i read these prblems all the time from u guys, and i really pissed off, cause it happens to everyone, dont say im not taking care of it, cause ur right im not, its not my gun why would i, but it still pisses me off how unreliable it has proved to be, anyways, i hope u guys are right, i will try to fix it, thanks for the advice

well i dont know about other ppl but my gun hasnt had a problem in over 9 months.

**Hobo_Joe** · February 1st, 10:50 AM

Dude seriosly, if its not your gun Y do you care so much?

Plus tell ur mate he is an idiot for not looking after his marker properly, the throw some sand down the feedneck... fire a few shots and kick himj in the head

**20bps_tes** · February 1st, 06:09 PM

Quote:

Originally Posted by SupahFly21

well i dont know about other ppl but my gun hasnt had a problem in over 9 months.

mine either wunder why

**ToridXFast** · February 1st, 08:10 PM

becacause we all take care of them take the gun back to him and tell him to do how about that, make it his job to learn about it and i havent had a problem yet with my gun, read learn absorb paintball its not that hard, take it all apart and throw each piece at him tell him to clean it and piu it back together, make him learn paintball will only get worse with incoherent noobs that think their gun is indistructable if you respect your marker it will show, lets get nastalgic here, you said it was his gun right so give it back tell him to get pissed, and tell him to get on here so we can chew his ass out for being so f*cking retarded.

**SupahFly21** · February 1st, 08:46 PM

Quote:

Originally Posted by ToridXFast

becacause we all take care of them take the gun back to him and tell him to do how about that, make it his job to learn about it and i havent had a problem yet with my gun, read learn absorb paintball its not that hard, take it all apart and throw each piece at him tell him to clean it and piu it back together, make him learn paintball will only get worse with incoherent noobs that think their gun is indistructable if you respect your marker it will show, lets get nastalgic here, you said it was his gun right so give it back tell him to get pissed, and tell him to get on here so we can chew his ass out for being so f*cking retarded.

being a bit rude dude. no need to start a flame war.
and yes many people do have problems, but most people dont when the gun is taken care of properly. your friend probably after he plays, lets it sit out or under the bed for weeks before he cleans it. if he even cleans it.

**unknownpsycho** · February 2nd, 02:07 PM

This is a common problem with TESs, and it seems noone knows the answer to fixing it. And NO, it isn't just a problem with people who don't take care of their markers. This problem is most noticable when you are dry firing because the bolt isn't getting enough back pressure to recock.

Try sticking a swab down the barrel and shooting. Does it recock? Now put some paint in the feedneck, cover up the top, and take a few shots. Does it recock? Try this and get back to me.

**ToridXFast** · February 2nd, 07:06 PM

umm yeah id you dont lube your reg or have enough pressure it will happen so dont say we who said it was improper maintance because it will never help a marker without proper maintance and no its not a common problem there is not enogugh pressure turn the reg up, and try it, lube it, clean it all out check your block and springs, then get bak to us this is the first time i heard this problem

**unknownpsycho** · February 2nd, 08:26 PM

Quote:

Originally Posted by ToridXFast

umm yeah id you dont lube your reg or have enough pressure it will happen so dont say we who said it was improper maintance because it will never help a marker without proper maintance and no its not a common problem there is not enogugh pressure turn the reg up, and try it, lube it, clean it all out check your block and springs, then get bak to us this is the first time i heard this problem

First of all, you should really look into using punctuation. It'll make it a whole lot easier to understand what you're saying.

Secondly, don't take me for a complete retard just because you don't understand the problem. It occurs with a completely lubed marker- bolt, striker, cupseal, regulator- everything. Pressure is set from 450-500 psi, tested with every compatible spring in a Spyder spring kit. If this is the first time you've heard of this problem, they you apparently aren't very familiar with TESs.

**pbpro115** · February 2nd, 09:55 PM

Quote:

Originally Posted by pball151

why are you complaing..? we are happy about our guns.. do we go and rag about how much your gun sucks.. no stfu

his tes sucks...and my cousins did similiar things, i guess they can be pretty good, but not my freinds (btw, its sold now so dont worry about it)

**SupahFly21** · February 2nd, 10:36 PM

Quote:

Originally Posted by unknownpsycho

Pressure is set from 450-500 psi,

TES's are best at like 200-250 psi.

**unknownpsycho** · February 2nd, 10:57 PM

Quote:

Originally Posted by SupahFly21

TES's are best at like 200-250 psi.

This is a TES, not The One. It's still a blowback marker. 450psi is the reccomended operating pressure.