Thread Tools

***Barber*** · July 7th, 06:28 PM

What is the easiest way to put the eyes back in on the DM5? I can usually get 1 of them in and then the wire doesn't fit on the other one. Is there like an easier way to put them in?

**Fubar2** · July 7th, 11:39 PM

**** its just like the dm4, there so hard. i took a allen wrench and pushed the side of the eye trying to line it up with the hole and another wrench to push the eyes into the hole, it might take a bit to get it in, you just gota screw with it for a bit.

***freddieb321@hot*** · July 9th, 12:17 AM

^^^ya, but make sure3 u dont scratch the anno

**Snip3r** · July 9th, 12:19 AM

Position one eye to go in...hold the other off...as you push the position'd one in, let the other fall into position...both should go in with a little force...

***Barber*** · July 9th, 12:28 AM

The problem is getting them both to the eye holes.

***freddieb321@hot*** · July 9th, 01:22 AM

kinda weird suggetion but if u maybe take a mini straw like they have for coffee, and stick it in the eye hole, it will block the wires from getting in the way of the eyes

**crazycupcake** · July 9th, 09:52 PM

well, what i did is take the noid off first, gives you that much more room to work in.
getting one in is easy, the other one is hard, but if you push in and out, in and out, you should see the little LED looking eye stand coming up slowwwly through the hole, just slowly and with alittle force keep pushing it up. use hospital twizers or some**** if its really close to the end. then just pop them in the eye holes themselfs and push the wires back into the body. screw the noid back on, and the grip frame.

Thread Tools

View more Paintball photos