NYC89

I recently bought a barely used DM4 on ebay. The guy has excellent feedback and has been very helpful but my gun still leaks. It only leaks out the back of the bolt, through the hole. When i turn the reg on more powerful the air shoots out, and when i turn the reg down no air gets to the gun. I checked and replaced about 3 O-Rings but the problem still constists. I have no idea what would be wrong and the only thing I can think of is replacing every O-Ring and hoping. The gun is oiled btw and i used 2 different nitro tanks.

Anyone have this problem or know what to do??? Any suggestions are greatly welcomed. I wana use the damn gun

Barber

It's the back o-ring on the bolt guide. This happened to my DM5 and it was a ***** to fix.

__________________
♥ Chris Brown ♥
Old Feedback 34+/0- New Feedback 7+/0-
Naptown Killa Hater Paintball Trade My Gun

NYC89

So the back 2 O-Rings are broken you think?

Because my problem is, is that I tried my friends stock bolt out in my gun and that didnt work either. But that same bolt worked in his DM4 so i dont think its the O-Rings.

Thanks for the input ill try it anyway but it looks doubtfull. Maybe the low pressure regulator and the hyper II regulator are on too high pressure or too low?

Any input?

DarkTamer

No, he means the back cap (I think). There's an o-ring in there. I don't even know how to get it out.

__________________

burningcow422

If it's not the oring you probably need to raise the pressure a bit to get it to seal. Reset your regs.

__________________



-kyle
www.last.fm/