beaner19320

Hey, I just bought a DM4 on craigslist and i got it aired up and there is a HUGE leak out the back and the o ring on it doesnt fit it loops around the bolt when its to tight so i replaced it with an o ring that fit and i tightened it and it was a snug fit around the bolt and the gun and i aired it up and there was still a leak coming out the back of the bolt. do i need a new bolt or what please help!

Trbo323

reset both regs, it may be a issue that one of them is set too high

__________________

blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off

beaner19320

how exactly do you reset the regulators?

martix_agent

read your manual

__________________

If your a Christian paintballer put this in your sig.

Another promaster for sale $100!

beaner19320

there was not a manual included with it i got the one online and im pretty sure i understand what its saying about turning it in all the way then out about 5 times?

Trbo323

ya that should be it, try that and tell us if its still leaking, and from where

__________________

blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off

beaner19320

will do, it probably wont be til the weekend because it is at my brothers house and im back at school

beaner19320

well i got the leak fixed i replaced the orings in the bolt and reset the regulators. thanks guys.

kenny_1491

It was the two rear bolt O-rings(Ones on the actual bolt, not the bold guide), can guarentee that. If you need any more help on anything just shoot me a PM.

__________________




Magenta for RB