bjielsl

Just to start, I did use search.. I am new to this board, but not to boards... I understand how frustrating it is to answer the same question 100's of time...
OK now my problem
I pull the trigger and release and it keeps firing until i hit the trigger again. I have set the values for semi-auto and even reset it to factory settings. In addition, sometimes when I turn the gun off it will fire. I have replaced all the o-rings I can find.

Second, maybe dumb question. what is the bottom button for. I know that the top turns if off and on, but there is nothing in my users manual about the bottom button.

Thanks for all the help.
08slg

TheAznInvazn

You're sear might be bad if it still shoots after you turn your gun off

__________________

bjielsl

hate to be that guy, upon visual inspection how would i know if it was bad?

TheAznInvazn

The sear will be rounded off instead of having nice crisp corners

__________________

bjielsl

I took a look at the sear and it looks good. I found a piece of the cleaning rod material in the crook of the sear, and the spring was pretty bent. I flipped the spring and put it all together. Put a fresh battery in it, and it seems to be kinda ok now. I am still sometimes getting 2-3 shots per trigger pull and sometimes it will shoot when attaching the bottle. I can now hear an air leak, so my next step is to completely disassemble the marker and replace all the o-rings again.