Thread Tools

**olddfatbulldog** · January 5th, 02:07 PM

I can not get the ****ing macroline off of my Ego for the life of me. I wanna lube the reg but the macro won't come off. It's starting to piss me off. Suggestions?

***Barber*** · January 5th, 05:39 PM

Just like... pull it out.

Can you get it off of the ASA? Maybe you could slide something over the macro to push in the fitting while you pull or something.

**p8ntballweird** · January 5th, 06:49 PM

you just push the thing in and pull...did you like... put loctite or some **** on it

**punk_pntballar** · January 5th, 06:54 PM

is there dirt in it.......cause that would stop it from being able to be pushed in, resulting in you not being able to pull the macro out.

**butterjuice** · January 5th, 06:55 PM

same thing is happening on my old imp...i can't get the damn thing out.....

**olddfatbulldog** · January 5th, 07:30 PM

It's been this way since I got it. Which is why I haven't lubed it yet. Too lazy to get the ****ing macro off. I push/pull but it won't budge. On my Timmy it just came off. If it gets bad enough, I'll get it then twist the fitting off and buy macro and possibly new macro fittings.

GRRRRR

**jaggy13** · January 6th, 01:27 PM

try taking your ASA off to give some slack on the line to work with. What ends up happening is the teath on the coupler can't release unless the collar is pushed in all the way. If there is not enough slack to work with then it can be a little challenging.

**olddfatbulldog** · January 6th, 07:43 PM

I'm pretty sure that's what was happening Jaggy. There was barely enough macro to start when the gun came stock. I'm gonna try to take off the rail/asa then see what happens.

Thanks

**Born2Drive3** · January 6th, 09:43 PM

Cut the macro in the middle, take the fittings off and put new ones and new macro on.

Problem solved.

**olddfatbulldog** · January 6th, 11:20 PM

Yeah the ASA thing didn't work so if I'm at the shop this sunday then that's what I'm gonna do.

**jeluso** · January 20th, 08:38 PM

good idea.

weird though, most the guys on my team shoot ego's and no one has had a problem...maybe it swelled alittle bit or somethin is pinched....er somethin

Thread Tools

View more Paintball photos