Paintballer2005

ok guys here's my problem,

i have a piranha r6 E-force and i went to a course down here where i live and it was working just fine until like the 3 game and then like every 2nd or 3rd shot it would decock itself and now every time i fire it decocks and i have to cock it each time i shoot, do you guy know whats wrong and what can i do to fix this problem?

thank you

colton

__________________
ion with:
cp reg,
'05 dye stickies,
mini shocktech rail,
ccm feed neck,
cp trigger,
and pipe kit.
68/45k carbon fiber wrapped tank with hyperflow 201 adjuatable input reg with cradle.

my local shop's site, check out the forums.

crazycupcake

it can be either one of these...

1. no air
2. needs lubing
3. orings problem / pinching
4. if you're using co2, valve orings / frozen valve
5. if you're using a reg, it could have gotten too dirty
6. change springs

its prolly lube though... lube buy good pb lube and put some on all the orings.

__________________

MSN: ivan920@hotmail.com

Paintballer2005

thx dude

__________________
ion with:
cp reg,
'05 dye stickies,
mini shocktech rail,
ccm feed neck,
cp trigger,
and pipe kit.
68/45k carbon fiber wrapped tank with hyperflow 201 adjuatable input reg with cradle.

my local shop's site, check out the forums.

PIRANHA PAUL

Mine Did Summin Like That...... My Problem Was Alot Of Paint On/arond The Bolt.....for Some Reason It Broke The Ball Instead Of Pinch....... Take Apart , Clean, Lube And Shoot!!!

onesikpup

and if that dont work....i recommend getting an anti-siphon installed in your co2 tank. i had no end of hell getting my fish to stop doing that.

__________________
FEEDBACK

Emrys_250

That used to happen to mine. Turns out I wasn't screwing my HPA bottle all the way on. I'm such a n00b.

__________________

spikoman

lube, orings, oil cupseal ,normal maintenince.

__________________


PMI Owner #69

~Black Eforce Ext Pro 2k3~Palmers Stabilizer~Clear EgGolotion2~Silver .689 14" cp 1 pieceFBM Blade Trigger

crazycupcake

Stop repeating what was mentioned above to seem smart.

__________________

MSN: ivan920@hotmail.com

Paintballer2005

hey it's ok dude i dont mind if they repeat i just got some new lube and im see what happens when i apply it, but if that dosent work all the other stuff is good and i already have anti-syphon and i clean my gun like every day even if i don't shoot, but if it dosent work take into consideration my gun is in store bought condidtion so what else could it be?

__________________
ion with:
cp reg,
'05 dye stickies,
mini shocktech rail,
ccm feed neck,
cp trigger,
and pipe kit.
68/45k carbon fiber wrapped tank with hyperflow 201 adjuatable input reg with cradle.

my local shop's site, check out the forums.

crazycupcake

Broken cupseal perhapse? but i think when you make sure all the orings are good and you lube it nicely, it should work.

__________________

MSN: ivan920@hotmail.com

Jase

pwned.