joeyk803c

I know what you mean. Lp doesn't always mean less effeciency(sp?). Timmies for example are great on air and run LP. It depends on the marker. Some run better at a higher pressure, some at a lower psi.

__________________
Meh

SEFishy

BUT if timmys could handle it the higher pressure would allow better shots-per-tank, yet lose the ability to use the best balls. its all really a trade off. its whatever u prefer. if you have a 45/3000 tank low pressure and shooting alot could be bad. but if you have a 68/4500 then feel fre to lower it and launch the balls. right now my pranha runs on 80psi at a constant 278 fps. i can shoot an entire case before my 68/45 is empty

__________________

joeyk803c

Yeah and with a stock fish you wouldn't get more than 1000 shots of of it. I only get at the most of 720 shots out of my stock piranha on my 72/3000

__________________
Meh

SEFishy

im going to guess a 68/45 and a 72/30 should have about the same shots. my gun is far from stock but u should be getting better shots then that. try a harder spring then adjust the speed down a little

__________________

joeyk803c

I need to get a spring kit lol. Right now I am working on making my fishy go Lp. I just ported the valve, my friend is going to mod the hammer tomorrow. I'm going to get a spring as soon as I go to my local Proshop.

__________________
Meh

skinny_k

...so lower pressure means more shots per tank or less shots per tank and better fps..... i donno im not really sure i get ir guys.

__________________
!! !! !! !!

joeyk803c

On certain markers. It is hard to explain but a blowback at 350 psi will get better effiency than a blowback at 800 psi

__________________
Meh

SEFishy

yet going to far will waste shots per tank. but the lower you go the easyer it is on paint. meaning the less breaks you get, high pressure will always get great shots per tank. but tends to bust the more higher end balls ment for lower pressure

__________________

onesikpup

its kind of a complex system of give and take....but, you need to know what you want more before you lower yourself...

__________________
FEEDBACK

skinny_k

ok im staring 2 get it guys. How do i turn down the psi on my reg?...

__________________
!! !! !! !!

joeyk803c

Yeah, I have the finished hammer, and Valve. Pics up asap.

__________________
Meh

SEFishy

there normaly a allen screw somewhere on the reg. screwing in is normaly up down and out raises it. normaly

__________________