Guilty Slayer

I've had my EXT 2k3 for about a year or so, it works quite well. I have only gone paintballing 3 or 4 times and I really enjoy it. Just recently I took out the hammer/bolt system and oiled it and put in the larger spring (for better velocity) now when I hook up my CO2 tank I hear a slow rush of CO2 escaping from the barrel, and my gun won't hold any pressure. What could be causing this?

krazyimpulsekid

try rubbing some of the oil off u probally put to much and put new o-rings on the bolt and hammer and if u know how to unscrew the volumizer change the o-ring on it and that ought to do it

Guilty Slayer

No I don't know what the volumizer is, is it the little screw off thing with the spring inside, underneath the barrel? If so I already replaced and oiled the O-ring.

onesikpup

you either put the valve in backwards (the thing under the trigger frame, held in by the little brass screw) or, you need a new cup seal (the metal rod with the little round black thingy on the end).

__________________
FEEDBACK

Guilty Slayer

Thanks a bunch, it was the cup seal and I blew an O-ring in my regulator because I tightened the pressure screw too much. =p Thanks agian!