LEOPBALLER

Wuts up, i just bout the piranha R6 thinking it was a pretty good gun because it had the automatic choice , but today when i went to use it for the first time it was doing alright until i tried the automatic choice on it and it wasnt working right...when i would shoot it being automatic it would shoot only 1 paintball and then just shoot air, its not because my Co2 was empty or a paintball busted in it, it just wont shoot anymore paintballs except that 1 when i first put it on automatic but then when i shoot it semi auto it works ok..why doesnt paintballs come flyin out when i put it on automatic? also if u guys know where i can get a good long barrel for cheap I'd appreciate it..

Hawk

I think the Tournement lock is on. Take the Trigger frame off the marker and there should be a blue or red switch on the top of the board. just flip it the other way, then I think it should be able to shoot Auto. Not totally sure though, my R6 was a mech.

__________________
PMI Owner #11
Tippy Owner #148

LEOPBALLER

Cool, thanks man ill do it but the kind of R6 that i have is where you have to be holding the litttle black button to the side the whole time you are shooting it automatic but i dont know that may be the problem ill check it out thanks again

crazycupcake

electric hopper?

__________________

MSN: ivan920@hotmail.com

Emrys_250

It sounds like the hopper isn't feeding. Try shaking the gun when it's on full auto. If it works, you need an electro hopper.

__________________

LEOPBALLER

ok cool ill get 1 or borrow my friends and see if thats the problem , also u guys know any websites where i can get a nice long barrel for my type of gun for better accuracy?

Paintballa44574

long barrels make your gun less efficient and dong make it any more accurate. Get a 14" j&j ceremic, sp teardrop/progressive or a cp one piece.

onesikpup

definately stay under 14" for a barrel.

you dont need to hold down the black button for "auto"

to switch the tourney lock off- remove trigger frame, take out the little silver screw holding the board down. lift one end, and wiggle it out. be careful not to break it, but it will take a moderate amount of force. flip it over, you'll see the switch.

you definately need an electric hopper to use this feature.

i have a blue 12v revy w/ x board for sale, needs a new lid, $15 plus shipping.

__________________
FEEDBACK